627028
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
8. mainTenance
Warning!
Turn the machine off and disconnect it from the mains before maintenance or repairs are performed!
Frequently blow out any dust that may accumulate inside the motor.
Apply a light coat of car wax to the table and column to keep the surfaces clean.
If the power cord is worn, damaged or cut, have it replaced immediately by a qualified electrician.
8.1 lUbricaTion
All ball bearings have been greased and do not require any further lubrication. Periodically lubricate the gea and
rack table elevation mechanism, the splines (grooves) in the spindle and the rack (teeth).
9. elecTrical sysTem
Figures 19 and 20
Check the tension of the machine and the power source before connecting. They should match.
Always shut down the machine after using it and remove the plug from the socket. Never pull the cable to
remove the plug, this will lead to damage to the cable with a possible shortcut as a result.
9.1 groUnding
In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of an electric shock. This machine is provided with a grounded cable and plug.
The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all
local codes and ordinances.
Do not modify the plug if it will not fit in the outlet. Have the proper outlet installed by a qualified electrician.
Improper connection of the equipment grounding conductor can result in a risk of electric shock. The conductor
with insulation having an outer surface that is green with or without yellow stripe is the equipment grounding
conductor. If a repair or a replacement of the electric cord or plug is necessary, do not connect the equipment
grounding conductor to a live terminal.
Check with a qualified electrician if the grounding instructions are not completely understood, or in doubt as to
whether the tool is properly grounded.
Repair or replace damaged or worn cords immediately.
9.2 prodUcT specificaTions
Model HU16-2 Topline HU16-4 Topline
Motor power 0,38 kW 0,38 kW
Drilling capacity 16 mm 16 mm
Drilling depth 80 mm 80 mm
Spindle taper MT2 MT2
Number of speeds 12 12
Spindle speed range 280 - 3000 rpm 280 - 3000 rpm
Column diameter 70 mm 70 mm
Distance spindle-column 185 mm 185 mm
Base dimensions l x w 400 x 230 mm 400 x 230 mm
Packaging dimensions l x w x h 1390 x 600 x 260 mm 1390 x 600 x 260 mm
Net weight 60 kg 60 kg
Voltage 230 V 400 V
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 16-4 TOPLINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 16-4 TOPLINE in the language / languages: English as an attachment in your email.

The manual is 4,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 16-4 TOPLINE

Huvema HU 16-4 TOPLINE User Manual - German - 16 pages

Huvema HU 16-4 TOPLINE User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info