627057

Huvema CRDM 3050 X 2000 TOPLINE Manual

8
Zoom out
Zoom in
Previous page
1/36
Next page
8
5.2 aufstellplan (alle angaben In mm)
Obige Abbildungen beziehen sich auf den Maschinenfuß, die Fundamentbolzen und die relativen Positionen für
das Modell CRDM 3050 x 2000.
5.3 platzbedarf
Aus Sicherheitsgründen muss bei der Maschineninstallation ausreichend Platz berücksichtigt werden. Der
Platzbedarf der Maschine ist wie folgt:
Die Berechnung erfolgt auf Grundlage eines Ausleger-Drehbereichs von 360°, dem größten Ausleger-
Außendurchmesser und einem Aufschlag von 1.000 mm. Die Abmessungen sind für die unterschiedlichen
Modelle abweichend.
MODELL Abstand von der Säulenmitte
zum Auslegerrand
Zusätzlicher
Wartungsbereich (A)
Platzbedarf insgesamt (B)
CRDM 3050 x 2000 2537 mm 1000 mm 7074 mm
3-2
TPR-2000H floor diagrams. (Unit : mm)
The above diagrams are for the bases and ground bolts, as well as its relative positions of
TPR-2000H.
3-3
3.1.2 Space requirement
For safety reason, Path must be considered when installing. For space, it requires:
Its calculation is the area of the arm rotating 360 de
g
ree, the most outer circle and plus 1000
mm. Different models has different dimensions.
MODEL The distance from the
column center to the arm
limit.
Plus maintenance area
(A)
Total space
requirement
(B)
TPR-1230 1546 mm 1000 mm 5092 mm
TPR-1230H 1546 mm 1000 mm 5092 mm
TPR-1600H 2087 mm 1000 mm 6174 mm
TPR-2000H 2537 mm 1000 mm 7074 mm
3.2 Environment requirement
a. Never put the machine in the places where sun shines directly on it.
b.
Temperature: normal range is between +5℃
and
40℃
.
c.
Humidity: between 30% and 95%. At the max. temperature 40℃
，The relative
humidity should not be over 50％
. And at the relative lower temperature, higher
humidity is acceptable I.g. at temperature 20℃
,
humidity 90％
is fine.
d. Please keep the machine away from gasoline, chemical substances, dust, acid, sulfides,
magnetic interference and explosive environment.
e. Please keep the machine away from the electrical interference source like welding
machine and EDM.
f. The installation ground must be flat.
g. The illumination of the work area: greater than 500lux.
h. Good ventilation.
i. Please take care there is no hydraulic splash to prevent from anyone slipping tripping
and falling in danger.
j Please take litter to the Recycling Center or any appropriate equipment.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema CRDM 3050 X 2000 TOPLINE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema CRDM 3050 X 2000 TOPLINE in the language / languages: German as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info