Manual Husqvarna YTH200 (page 3 of 68) (English, German, Dutch, French, Italian, Spanish)

477593

Zoom out

Zoom in

1/68

1. Safety Rules

Safe Operation Practices for Ride-On Mowers

IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS.

FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

I. Training

• Read the instructions carefully. Be familiar with the

controls and the proper use of the equipment.

• Never allow children or people unfamiliar with the instruc-

tions to use the lawnmower. Local regulations may restrict

the age of the operator.

• Never mow while people, especially children, or pets are

nearby.

• Keep in mind that the operator or user is responsible for

accidents or hazards occurring to other people or their

property.

• All drivers should seek and obtain professional and prac-

tical instruction. Such instruction should emphasize:

- the need for care and concentration when working

with ride-on machines;

- control of a ride-on machine sliding on a slope will

not be regained by the application of the brake.

The main reasons for loss of control are:

a) insufficient wheel grip;

b) being driven too fast;

c) inadequate braking;

d) the type of machine is unsuitable for its task;

e) lack of awareness of the effect of ground

conditions,especially slopes;

f) incorrect hitching and load distribution.

II. Preparation

• While mowing, always wear substantial footwear and long

trousers. Do not operate the equipment when barefoot or

wearing open sandals.

• Thoroughly inspect the area where the equipment is to be

used and remove all objects which may be thrown by the

machine.

• WARNING - Petrol is highly flammable.

- Store fuel in containers specifically designed for this

purpose.

- Refuel outdoors only and do not smoke while refuel-

ing.

- Add fuel before starting the engine. Never remove

the cap of the fuel tank or add petrol while the engine

is running or when the engine is hot.

- If petrol is spilled, do not attempt to start the engine but

move the machine away from the area of spillage and

avoid creating any source of ignition until petrol

vapors have dissipated.

- Replace all fuel tanks and container caps securely.

• Replace faulty silencers.

• Before using, always visually inspect to see that the

blades, blade bolts and cutter assembly are not worn or

damaged. Replace worn or damaged blades and bolts in

sets to preserve balance.

• On multi-bladed machines, take care as rotating one

blade can cause other blades to rotate.

III. Operation

• Do not operate the engine in a confined space where

dangerous carbon monoxide fumes can collect.

• Mow only in daylight or in good artificial light.

• Before attempting to start the engine, disengage all blade

attachment clutches and shift into neutral.

• Do not use on slopes of more than 10°.

• Remember there is no such thing as a “safe” slope. Travel

on grass slopes requires particular care. To guard

against overturning;

- do not stop or start suddenly when going up or

downhill;

- engage clutch slowly, always keep machine in gear,

especially when traveling downhill;

- machine speeds should be kept low on slopes and

during tight turns;

- stay alert for humps and hollows and other hidden

hazards;

- never mow across the face of the slope, unless the

lawnmower is designed for this purpose.

• Use care when pulling loads or using heavy equipment.

- Use only approved drawbar hitch points.

- Limit loads to those you can safely control.

- Do not turn sharply. Use care when reversing.

- Use counterweight(s) or wheel weights when sug-

gested in the instruction handbook.

• Watch out for traffic when crossing or near roadways.

• Stop the blades from rotating before crossing surfaces

other than grass.

• When using any attachments, never direct discharge of

material toward bystanders nor allow anyone near the

machine while in operation.

• Never operate the lawnmower with defective guards,

shields or without safety protective devices in place.

• Do not change the engine governor settings or overspeed

the engine. Operating the engine at excessive speed

may increase the hazard of personal injury.

• Before leaving the operator’s position:

- disengage the power take-off and lower the attach-

ments;

- change into neutral and set the parking brake;

- stop the engine and remove the key.

• Disengage drive to attachments, stop the engine, and

disconnect the spark plug wire(s) or remove the ignition

key

- before cleaning blockages or unclogging chute;

- before checking, cleaning or working on the

lawnmower;

- after striking a foreign object. Inspect the lawnmower

for damage and make repairs before restarting and

operating the equipment;

- if the machine starts to vibrate abnormally (check

immediately).

• Disengage drive to attachments when transporting or not

in use.

• Stop the engine and disengage drive to attachment

- before refueling;

- before removing the grass catcher;

- before making height adjustment unless adjust-

ment can be made from the operator’s position.

• Reduce the throttle setting during engine run-out and, if

the engine is provided with a shut-off valve, turn the fuel

off at the conclusion of mowing.

Eng

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna YTH200 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna YTH200 Manual

Product: