477588
36
Zoom out
Zoom in
Previous page
1/80
Next page
36
5
NOTA!
La máquina tiene un interruptor de seguridad que corta
la corriente al motor si el con duc tor sale del asiento con
el motor en marcha y con la palanca de acoplamiento/
desacoplamiento en la posición de acoplamiento.
NOTA!
La macchina è dotata di interruttore di sicurezza che interrom
pe l’alimentazione di corrente al motore quando l’operatore
lascia il sedile con il motore acceso e il tagliaerba inserito.
N.B.!
De machine is uitgerust met een veiligheidsschakelaar, die
onmiddellijk de stroom naar de motor verbreekt, wanneer
de bestuurder zijn plaats verlaat, terwijl de motor loopt en
de aan/uitschakelhendel op “ingeschakeld” staat.
NOTE!
The machine is equipped with a safety switch which
immediately breaks the current to the en gine if the driver
leaves the seat with en gine run ning and with the con nec tion/
dis con nec tion control in position “connection”.
HINWEIS!
Die Maschine ist mit einem Sicherheitsschalter ausgerüstet,
der den Strom zum Motor sofort unterbricht, wenn der
Fahrer den Sitz bei laufendem Motor verläßt, und dabei der
Schalthebel für das Mä hag gre gat auf “eingeschaltet” steht.
REMARQUE!
La machine est équipée d'un dispositif de sécurité qui arrête
le moteur immédiatement, s'il est encore en fonctionnement,
lorsque le conducteur quitte le siège du tracteur.
To Move Forward and Backward
The direction and speed of movement is controlled by the
forward and reverse drive pedals.
Start tractor and release parking brake.
Slowly depress forward or reverse drive pedal to begin
movement. Ground speed increases the further down the
pedal is depressed.
To Use Cruise Control
The cruise control feature can be used for forward travel only.
With forward drive pedal depressed to desired speed,
move cruise control lever forward to “SET” position and
hold while lifting your foot off the pedal, then release the
cruise control lever.
To disengage the cruise control, depress the brake pedal
or tap on forward drive pedal.
Cutting
Lower the cutting unit by moving the lift lever forward and
connect the cutting unit. Choose a driving speed which suits
the terrain and required cutting results.
Vorwärts- und Rückwärtsbewegung
Bewegungsrichtung und –geschwindigkeit werden durch
die Pedale für Vorwärts- und Rückwärtsantrieb gesteuert.
Traktor starten und Feststellbremse lösen.
Das Pedal für den Vorwärts- oder Rückwärtsantrieb
langsam niederdrücken, um die Bewegung zu beginnen.
Die Grundgeschwindigkeit nimmt zu, je weiter das Pedal
nach unten gedrückt wird.
Verwendung der Geschwindigkeitsregelung
Die Einrichtung für die Geschwindigkeitsregelung kann nur
für das Vorwärtsfahren verwendet werden.
Das Pedal für Vorwärtsantrieb betätigen, bis die gewün-
schte Geschwindigkeit erreicht wird; dann den Hebel
für die Geschwindigkeitsregelung nach vorwärts in die
Position „SET“ bringen und halten, während Sie den Fuß
vom Pedal nehmen; danach den Geschwindigkeitsrege-
lungshebel loslassen.
Zum Auskuppeln des Tempomats drücken Sie das Brem-
spedal oder tippen Sie das Vorwärtsgangpedal an.
Schneidetätigkeit
Die Schneideeinheit herabsenken, indem der Bedienung-
shebel nach vorwärts bewegt und die Schneideeinheit ang-
eschlossen wird. Wählen Sie eine Betriebsgeschwindigkeit,
die dem Gelände und den gewünschten Schneideergebnis-
sen entspricht.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna YHT224T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna YHT224T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info