610297

Husqvarna Viking Manual

49
Zoom out
Zoom in
Previous page
1/51
Next page
With
straight
stitch,
using
the
regular
presser
foot
and
released
foot
pressure
darning
can
be
performed
in
exactly
the
same
way
as
with
the
mending
foot.
The
fabric
is
placed
in
a
hoop.
Gauze
is
used as
a
reinforcement
and
the
hoopis
guided
back
and
forth
by
hand.
Use
the
regular
presser
foot
and
turn
the
dial
for
adjustment
of
the
presser
foot
pressure
to
the
smallest
line.
Thread
tension
4.
With
darning
foot
(41
12
897)
This
is
done
free-hand
and
therefore
requires
some
practice.
The
work
can
be
stretched
in
a
hoop
and
the
hoop
should
he
held
so
that
the
fabric
rests
against
the
table.
Use
fine
darning
thread
and
gauze
as
a
rein
forcement
for
larger
holes.
Set
the
machine
at
straight
stitch
and
decrease
thread
tension
somewhat.
Lower
the
feed dog.
Set
the
presser
foot
pressure
on
the
darning
symbol.
Place
the
hoop
under
the
darning
foot.
Lower
the
presser
foot
and
bring
up
the
lower
thread.
Begin
by
sewing
back
and
forth
over
the
hole
with
long
stitches.
Since
the
feed
dog
is
disengaged.
you
must
guide
the
hoop
back
and
forth
yourself
and
thus
determine
the
stitch
length.
The
faster
you
move
the
hoop
the
longer
the
stitch
will
be.
Keep
the
machine
speed
uniform.
Continue
in
the
same
manner
until
threads
have
been
stitched
across
the
entire
hole.
Then
turn
the
work
900
and
darn
across
the
hole
with
short
stitches
obtained
by
moving
the
hoop
slowly
back
and
forth.
Keep
the
machine
speed
uniform.
If
the
hole
is
large.
cover
it
with
gauze
and
then
darn
as
described
above.
Darning
can
also
be
done
on
the
bias
of
the
fabric
orin
circles
if
this
would
be
better
adapted
to
the
structure
of
the
fabric.
47
… 49


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-viking

Reset search

  • Good afternoon
    I am looking for a service manual for a husqvana Viking CL 71 do you have this manual or is there a similar manual for this item

    Thanks Brett Submitted on 5-2-2022 at 09:02

    Reply Report abuse

  • Dear Sirs,
    I am looking for a manual for a Husqvarna Seeing Machine “Rose” do you have a PDF for this model?
    Many thanks Geoff Submitted on 13-7-2021 at 13:14

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Viking at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Viking in the language / languages: English as an attachment in your email.

The manual is 2,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info