656863

Husqvarna-Viking METAL HOOP 180-130 Manual

4
Zoom out
Zoom in
Previous page
1/4
Next page
4133793-26A © 2013 KSIN Luxembourg II, S.ar.l. All rights reserved. VIKING, INSPIRA, LIGHT-AND-TACKY TEAR-A-WAY, TEAR-A-WAY and AQUA MAGIC are trademarks of KSIN Luxembourg II, S.ar.l.
HUSQVARNA and the “crowned H-mark” are trademarks of Husqvarna AB. All trademarks are used under license by VSM Group AB.
Lace and Free-Standing Embroideries
If embroidering on light or shear fabric, or if you
want to make free-standing embroideries or lace,
use a water soluble stabilizer. Place the stabilizer on
the hoop (we recommend INSPIRA
™
Aqua Magic™,
#620114396), place the fabric on top of the stabilizer
and fix it to the hoop with the magnets. For lace and
free-standing embroideries, embroider directly on the
stabilizer.
When embroidering with thicker thread or when
stitching a design that has a lot of stitches (as in lace
embroidery) use double layers of stabilizer. Baste
around the design to prevent the layers of fabrics/
stabilizers from sliding (ill. J).
Use the optional set of magnets for extra security
(#620132696).
Standard Embroidery
The Metal Hoop 180x130mm is also suitable
for embroidery with tear-away stabilizer. We
recommend using INSPIRA
™
Tear-A-Way™ stabilizer
(#620112296).
Place the stabilizer on the hoop and place the fabric
on top. Use the magnets to fix the fabric to the hoop
(ill. K). The more stitches/the larger design, the more
magnets should be used. For denser designs we also
recommend to baste the fabric to the stabilizer.
Endless Embroidery
Endless embroideries are done easily with the Metal
Hoop 180x130mm. Use water soluble or tear-a-way
stabilizer, follow recommendations above on how to
hoop when using these stabilizers.
Embroider the first endless design, then remove the
magnets (ill L). Move the fabric until the needle is
in the left positioning stitch (ill M). If your machine
features Design Positioning, that can be used instead.
Fix the fabric with a magnet on the left side of the
hoop (ill N). Step through the design to move the
needle to the right positioning stitch. If neccessary
adjust the fabric. Fix the fabric to the hoop with the
remaining magnets (ill O). Continue embroidering.
Note: To replace an empty bobbin, raise the presser
foot and carefully remove the hoop from the
embroidery unit. Change the bobbin and re-attach
the hoop.
K
J
L M
N O
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna-Viking METAL HOOP 180-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna-Viking METAL HOOP 180-130 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna-Viking METAL HOOP 180-130

Husqvarna-Viking METAL HOOP 180-130 User Manual - German - 4 pages

Husqvarna-Viking METAL HOOP 180-130 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info