610295
5
Zoom out
Zoom in
Previous page
1/26
Next page
How
to
insert
a
needle
Removing
the
bobbin
case
from
the
shuttle
Loosen
the
needle
screw
(A,
Fig.
3).
Insert
the
needle
in
the
clamp
(B)
and
push
it
up
as
far
as
it
will
go.
See
that
the
flat
side
of
the
needle
is
turned
away
from
you
and
faces
toward
rear
of
ma
chine.
Tighten
the
screw
securely,
and
check
again
to
make
sure
that
the
needle
is
correctly
inserted.
The
long
groove
over
the
needle’s
eye
should
be
facing
you.
Turn
the
hand
wheel
(15,
Fig.
1)
toward
you
until
the
needle
is
in
its
highest
position.
Take
hold
of
the
bobbin
case
with
the
thumb
and
forefinger
(Fig.
4),
so
that
the
latch
(A,
Fig.
5)
is
depressed,
and
lift
the
case
out.
As
long
as
the
latch
is
depressed.
the
bobbin
is
held
in
its
ease.
To
remove
the
bobbin,
release
the
latch
and
turn
the
case
down
wards.
The
bobbin
then
falls
out.
j•
\y
\
A
I
Fig.
3.
Fig.
4.
Fig.
5.
3
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Viking 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Viking 7 in the language / languages: English as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info