733800
36
Zoom out
Zoom in
Previous page
1/40
Next page
WARNING: Use the correct cutting
attachment. Only use the cutting attachment
with the guards we recommend, refer to
Approved accessories on page 38
.
Cutting attachment guard
The cutting attachment guard prevents a loose object to
eject in the direction of the operator. The guard also
prevents the operator from accidentally touching the
cutting attachment.
Examine the cutting attachment guard for damage and
cracks. Replace if it is damaged or has cracks. Only use
the approved guard for the cutting attachment.
WARNING: Do not use a cutting attachment
without an approved guard. If an incorrect or
defective guard is installed, this can cause
damage to persons.
Trimmer head
WARNING: Always make
sure the trimmer line is
wound tightly and evenly
around the drum to
prevent harmful vibration.
Only use recommended trimmer heads and trimmer
lines.
Only use recommended cutting attachments.
Smaller machines requires small trimmer heads and
vice versa.
The length of the trimmer line is important. A longer
trimmer line requires greater engine power than a
shorter trimmer line of the same diameter.
Make sure that the cutter on the trimmer guard is
intact. This cuts the trimmer line to the correct
length.
Soak the trimmer line in water for a couple of days
before use to increase the life length.
Assembly TA1100
To assemble the loop handle
1. Put the loop handle onto the shaft, between the
arrows.
2. Put the spacer into the slot of the loop handle.
3. Install the nut, the knob and the screw. Do not
tighten fully.
4. Adjust the product to an applicable operation
position.
5. Tighten the knob.
To assemble the cutting attachment
guard and trimmer head
1. Attach the correct cutting attachment guard (A) for
the trimmer head (See,
Approved accessories on
page 38
).
2. Put the cutting attachment guard onto the fitting on
the shaft.
3. Secure with the bolt(L).
A
A
B
C
4. Install the drive disc (B) on the output shaft.
36 1301 - 003 - 20.11.2019
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TA1100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TA1100 in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TA1100

Husqvarna TA1100 User Manual - German, Dutch, French - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info