Manual Husqvarna SCANDINAVIA 400 (page 9 of 64) (English)

518170

Zoom out

Zoom in

1/64

Learn your Scandinavia 400

Threading the upper thread

Turn off the main switch.

Make sure the presser foot is raised

and the needle is in the up po si tion.

1. Pull the spool pin out. Place the

thread on the spool pin and the

spool holder on the spool pin as

described. Push the spool pin back

in.

2. Bring the thread in the direction of

the arrow under the thread guide

(a) and over the thread guide (b).

3. Bring the thread down between the

thread tension discs.

4. Continue threading by drawing the

thread from the right into the slot

on the take-up lever.

5. Thread last guide just above needle.

6. The needle is threaded from front

to back. The white on the presser

foot ankle makes it easy to see the

eye of the needle.

7. Place thread under the presser foot

and into the thread cutter where it

is cut.

Upper thread warning

If the upper thread breaks or if thread

spool runs out, the machine stops

and gives a signal. The symbol

is Á ashing on the display. If thread

breaks: Re-thread the machine. The

symbol goes out. If thread spool

runs out: Remove your work and

the bobbin. Re-thread the machine.

Replace the bobbin and restart.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 400 in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SCANDINAVIA 400 Manual

Product: