Manual Husqvarna SCANDINAVIA 100 (page 28 of 32) (English)

518164

Zoom out

Zoom in

1/32

Trouble Shooting

Always Start by Checking the Needle

• Always start with a new needle as soon

as you discover that a stitch is not what

you expected. Test sew on a scrap of the

fabric you are sewing. Check that you

have chosen the correct needle and see

that it is correctly inserted. See page 11.

Unattractive Stitches

• The thread tension is not correct. See page

10.

• Make sure that the thread is not catching.

Certain thread spools are unsuitable for

spooling from the horizontal spool pin.

Try instead with the vertical spool pin.

• The machine may be incorrectly threaded.

Be sure to place spool holders correctly.

The correct threading is shown on page 7.

• Wrong bobbin thread. It should be of the

same thickness as the upper thread.

The Needle Breaks

• You may have helped the machine to

feed by pulling the fabric. The needle

can strike against stitch plate and break.

Change the needle. See page 11.

The Upper Thread Breaks

• Check the thread spool to see that it has

not caught in any way.

• The needle eye may have sharp edges

which cut the thread. If so, change the

needle. See page 11.

• The upper thread is incorrectly threaded.

See page 7.

• The upper thread may have too much

tension. Refer to page 10.

The Thread is Knotted

• The hole in the stitch plate may be chip-

ped and have sharp edges. We recom-

mend that you replace it.

The Bobbin Thread Breaks

• The bobbin thread may be incorrectly

threaded. See page 9.

• The stitch plate hole is damaged. See ”The

thread is knotted”.

Irregular Bobbin Winding

• This may be due to poor quality thread.

When sewing with cotton thread, increase

the thread tension.

• The machine is not correctly threaded for

bobbin winding. See page 7-9.

The Fabric Puckers

• The upper thread tension is too tight. See

page 10 for correct thread tension.

The Machine Does Not Feed the Fabric

• The stitch length is too short. Increase

stitch length.

• The feed teeth may be lowered. Raise

them by turning the stitch length dial to

the left.

• The feed teeth are full of dust and dirt.

Clean with the brush. See page 25.

The Seam is Too Loose – Fabric Layers

Not Held Together

• The thread tension is far too loose. Page

10 shows how to adjust the thread ten-

sion.

Machine Runs Sluggishly

• Dirt or lint has built up under the stitch

plate. Loosen the plate and brush clean

between the feed teeth and in the bottom

area. See page 25.

• Dirt or lint has packed in the hook.

Remove the bobbin and clean with the

brush. See page 25.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SCANDINAVIA 100 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SCANDINAVIA 100 Manual

Product: