518160
6
Zoom out
Zoom in
Previous page
1/48
Next page
6
1
2
456
7
3
8
9
12
10
11
Included accessories
Presser Feet
Utility Foot A Attached on the machine upon delivery. This foot is used mainly for straight stitching and
zigzag stitching with a stitch length longer than 1.0.
Utility Foot B When sewing decorative stitches or short zigzag stitches and other utility stitches with
less than 1.0 mm stitch length, use this foot. The tunnel on the underside of the foot is
designed to feed smoothly over the stitches.
Buttonhole Foot C This foot is used for sewing buttonholes step by step. Use the guide lines on the toe of
the foot to position the garment edge. The two tunnels on the bottom of the foot ensures
a smooth feed over the buttonhole columns. The nger on the back of the foot holds
cording for corded buttonhole.
Blind Hem Foot D This foot is used for blind hem stitches. The inner edge of this foot guides the fabric. The
right toe of the foot is designed to ride along the hem edge.
Zipper Foot E This foot can be snapped on either to the right or to the left of the needle, making it easy
to sew close to both sides of the zipper teeth. Move needle position to right or left to sew
closer to zipper teeth or for covering large cording.
Non-Stick Glide Foot
H
This foot, with a non-stick coating underneath, is used when sewing foam, vinyl, plastic, or
leather to minimize the risk of these materials sticking to the foot.
Edging Foot J This foot is used for overcasting and seam/overcasting. Stitches form over the pin which
prevents puckering at the edge of the fabric.
Quilter’s 1/4” Piecing
Foot P
(Only with 870 Quilt)*
This foot is used when piecing quilt blocks. The foot has seam guide marks 1/4 (6 mm)
and 1/8 (3 mm). The foot can only be used with straight stitch.
Clear Open Toe Foot
(Only with 870 Quilt)*
For satin stitch applique, taper stitches and decorative stitches. The tunnel on the underside
of the foot feeds smoothly over the stitches and the transparent foot with open front gives
greater visibility for accuracy.
Embroidery/Darning
Foot R
For free-motion darning, quilting and embroidery.
One-Step Sensor
Buttonhole Foot
When connected to the machine, the buttonhole is sewn in a suitable length to the button
size that has been entered into the machine.
1. Thread nets. Slide on the spool when using
synthetic threads that easily unwind (2).
2. Non-Stick glide plates (2)
3. Needles
4. Light bulb remover
5. Seam ripper
6. Brush
7. Screwdriver
8. Edge/quilting guide (Only with 870 Quilt).
9. Felt pad
10. Bobbins (5)
11. Extra spool caps, one large, one small.
12. Clearance plate/Button Reed
*Sold separately for 850 and 830
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna SAPPHIRE 830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SAPPHIRE 830 in the language / languages: English as an attachment in your email.

The manual is 6,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info