518134
9
Zoom out
Zoom in
Previous page
1/44
Next page
7
Learn your Platinum 770
Auxiliary Spool Pin
The auxiliary spool pin is used when
winding a bobbin from a second spool
of thread or for a second spool when
sewing with a twin needle.
When using the auxiliary spool pin,
place the large spool holder and a felt
pad under the thread spool.
Threading the Upper Thread
Switch off the main switch.
When threading the upper thread, make
sure that the presser foot is raised and
the needle is in the up position.
1. Pull the spool pin out. Place the
spool on the spool pin with spool
holder (follow the instuctions on
previous page). The thread should
reel clockwise. Push the spool pin
back in.
Hold the thread near the spool using
your right hand. Use your left hand
to bring the end of the thread in
the direction of the arrows on the
machine.
2. Bring the thread into the pre-tension
thread guide (a). Bring the thread
down and up between the thread
tension discs (b).
3. Continue threading in the direction
indicated by the arrows. Bring the
thread from the right when threading
into the slot on the take-up lever.
4. Pull the thread into the last guide just
above the needle.
5. The needle is threaded from front to
back (see needle threader for further
instructions).
6. Place the thread under the presser
foot and into the thread cutter on the
left side of the machine, pull it down-
wards to cut it.
b
a
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Platinum 770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Platinum 770 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info