Manual Husqvarna OPAL 650 (page 61 of 64) (English)

510453

Zoom out

Zoom in

1/64

Taking Care of your Machine – 61

TROUBLE SHOOTING

Any Time You Experience a Problem when Sewing:

• Select correct type and weight of fabric in the Exclusive

SEWING ADVISOR™ feature.

• Insert needle size and type as recommended on the

GraphicDisplay/TouchScreen.

• Rethread the top and bobbin threads.

• Use different spool pin positions (vertical or horizontal).

• Use thread nets (optional accessory, part number

4123977-01) and quality thread. We recommend the same

sewing thread on top and bobbin for general sewing. For

decorative sewing we recommend rayon thread on top and

bobbin thread in the bobbin.

If You Experience Problems when

Using the Sensor One-Step Buttonhole Foot:

• Make sure the white area on the side of the wheel is lined

up with the white marking line on the foot.

• Check to insure that the cord to the Sensor One-Step

Buttonhole Foot is properly plugged into the socket above

the needle area.

Fabric Puckers?

• Select correct type and weight of fabric in the Exclusive

SEWING ADVISOR™ feature.

• Use stabilizer.

• Check needle, it could be damaged.

• Insert needle size and type as recommended on the

GraphicDisplay/TouchScreen.

• Rethread top and bobbin threads.

• Change thread type to match fabric and sewing technique.

• Use quality thread.

• Shorten stitch length.

• Check your thread tension.

Skipped Stitches?

• Check needle - it could be damaged.

• Change needle to recommended size and type.

• Be sure the needle is inserted correctly all the way

into the clamp.

• Rethread top and bobbin threads.

• Use recommended presser foot.

• Turn machine off and on to reset.

• Consult your authorized HUSQVARNA VIKING

dealer

for service.

Needle Breaks?

• Use care not to pull fabric when sewing.

• Insert needle size and type as recommended on the

GraphicDisplay/TouchScreen.

• Insert needle correctly as described in on page 13.

Poor Tension?

• Select correct type and weight of fabric in the Exclusive

SEWING ADVISOR™ feature.

• Rethread top and bobbin - use quality thread.

• Insert needle size and type as recommended on the

GraphicDisplay/TouchScreen.

• Follow recommendations for thread tension (650).

• Follow recommendations for stabilizer.

Upper Thread Breaks?

• Does thread feed smoothly/not catching?

• Use thread nets (optional accessory, part number

4123977-01) and quality thread. For special threads

such as metallic etc. please consult the Accessory User’s

Guide (www.husqvarnaviking.com) for special needle

recommendations.

• Rethread top and bobbin threads - check for correct

threading. When using rayon thread on top, you should use

bobbin thread in the bobbin, not regular sewing thread.

• Try different spool pin positions (horizontal or vertical).

• If stitch plate hole is damaged, replace stitch plate.

• Is the correct spool cap used in front of the thread?

Fabric Does Not Move?

• Check to make sure feed teeth are up.

• Increase stitch length.

Bobbin Thread Breaks?

• Replace the bobbin in the machine, check correct

threading.

• Wind a new bobbin.

• If stitch plate hole is damaged - replace stitch plate.

• Clean bobbin area.

Bobbin Winds Irregularly?

• Check threading for bobbin winding.

Wrong Stitch, Irregular or Narrow Stitches?

• Turn machine off and on to reset.

• Change needle, rethread top and bobbin threads.

• Use stabilizer.

MY FOOT CONTROL DOES NOT WORK. i HAVE RE-PLUGGED IT IN, TURNED MACHINE ON/OFF, BUT NOTHING WORKS. i NEED TO USE THE START/STOP SWITCH TO SEW. Submitted on 18-11-2022 at 20:55
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna OPAL 650 in the language / languages: English as an attachment in your email.

The manual is 8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna OPAL 650

Husqvarna OPAL 650 User Manual - German - 64 pages

Husqvarna OPAL 650 User Manual - Dutch - 35 pages

Husqvarna OPAL 650 User Manual - French - 68 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna OPAL 650 Manual

Product: