518114
47
Zoom out
Zoom in
Previous page
1/52
Next page
Maintenance
Changing
the
light
bulb
The
light
bulb
is
placed
to
the
left
of
the
needle.
Place
the
rubber
sheath
found
in
the
accessory bag
with
its
deep
hole
around
the
bulb,
Do
not
turn
the
bulb,
just
pull
it
down
to
remove
the bulb.
When
inserting,
place
the
rubber
sheath
with
its
shallow
hole
around
the
new
bulb,
insert the
bulb
by
pushing
it
up.
Use
light
bulb
designed
as
indicated
on
the
front
of the
machine.
Care
of
the
machine
To
keep
your sewing
machine
operating
satisfactorily,
it
requires,
like
other
precision
machines,
regular
cleaning.
No
lubrication
(oiling)
is
needed.
Removing
the
stitch
plate
Remove
the
presser
foot
and the
bobbin
cover.
Lower
the
feed
teeth.
Place
the
stitch
plate
opener
on
the
brush.
There
is
a
recess
at
the
rear
of
the
stitch
plate.
Insert
the
stitch
plate
opener
at
the
recess
and
turn.
Cleaning
When
necessary,
the
feed
teeth
and
the
bottom
of
the
bobbin
area
must
be
cleaned
with
the
brush,
which
you
will
find
with
the
accessories.
Replacing
the
stitch
plate
Replace
the
stitch
plate
about
5
mm
in
front
of
the rear
edge and
push
it
backward.
Replace
the
bobbin
cover.
z
CD
CD
User’s
Guide
Iris
47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Iris at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Iris in the language / languages: English as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info