518112
52
Zoom out
Zoom in
Previous page
1/60
Next page
50
Care of your Interlude
Trouble Shooting
Any Time You Experience
a Problem When Sewing:
Enter correct type and weight of
fabric in the Sewing Advisor (445).
Insert new needle size and type as
recommended on the InfoDisplay
(445).
Rethread the top and bobbin threads.
Use different spool pin positions
(vertical or horizontal).
Use thread nets and quality thread.
We recommend the same sewing
thread on top and bobbin for general
sewing. For decorative sewing we
recommend embroidery thread on top
and regular sewing thread on bobbin.
Fabric Puckers?
Enter correct type and weight of
fabric into the Sewing Advisor (445).
Check needle, it could be damaged.
Insert new needle size and type as
recommended on the InfoDisplay
(445).
Rethread top and bobbin threads.
Change thread type to match fi ber
and sewing technique.
• Use quality thread
• Shorten stitch length
• Use stabilizer
Check your thread tension
Skipped Stitches?
Check needle - it could be damaged.
Change needle to recommended size
and type.
Be sure the needle is inserted
correctly and all the way into the
clamp.
Rethread top and bobbin threads.
Use recommended presser foot.
Turn machine off and on to reset.
Consult your dealer for service.
Needle Breaks?
Use care not to pull fabric when
sewing.
Insert new needle size and type as
recommended on the InfoDisplay
(445).
Insert needle correctly as page
12
explains.
Poor Tension?
Enter fabric weight and type in
Sewing Advisor (445).
Rethread top and bobbin - use quality
thread.
Insert new needle size and type as
recommended on the InfoDisplay
(445).
Follow recommendations for thread
tension.
Follow recommendations for stabilizer.
Upper Thread Breaks?
Does thread feed smoothly/not
catching?
Use thread nets and quality thread.
For special threads such as metallic
etc please consult your Accessory
User’s Guide for special needle
recommendations.
Rethread top and bobbin threads -
check for correct threading.
Try different spool pin positions
(horizontal or vertical).
If stitch plate hole is damaged,
replace stitch plate.
Is the correct spool holder used in
front of the thread?
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Interlude 445 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Interlude 445 in the language / languages: English as an attachment in your email.

The manual is 4,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info