610254
2
Zoom out
Zoom in
Previous page
1/36
Next page
Huskylock 902
Important Safety Instructions
When using the sewing machine, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine
DANGER - To reduce the risk of electric shock:
• The sewing machine should never be left unattended when plugged in. Always unplug
the sewing machine from the electrical outlet immediately after using and before
cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.
• Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
• Use only as described in this manual. Use only manufacturer’s recommended
attachments.
• Do not use with damaged cord or plug. If sewing machine is not working properly, has
been dropped or damaged, left outdoors, or dropped in water, return it to the nearest
authorized dealer or service center for examination, repair, electrical or mechanical
adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of sewing machine and foot controller free from the accumulation of lint,
dust, and loose cloth.
• Never drop or insert any objects into any opening.
• Do not use outdoors or on wet surfaces.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• To disconnect, turn the main switch off , then remove plug from outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Keep fingers away from all moving parts. Special care is required around the sewing
machine needles.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push the fabric while stitching. It may deflect the needle causing to
break.
• Switch the sewing machine off when making any adjustments in the needle area, such
as threading needle, changing needle, threading bobbin, or changing presser foot, and
the like.
• Always unplug the sewing machine from electrical outlet when removing covers, or
when making other user servicing adjustments mentioned in the instruction manual.
• Keep your work area well lighted.
• Always unplug before relamping. Replace bulb with same type rated 15 W.
SAVE THESE INSTRUCTIONS
This sewing machine is intended for household use
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 90 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 90 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info