610239
5
Zoom out
Zoom in
Previous page
1/38
Next page
Needle
*
TE
x
1
(#11
&
#14),
D8
xl
(#9,11,14),
DB
x
1KN
#11
can
be
used
on
these
machines.
TE
x
1
(#14)
is
mounted
on
the
machines.
NOTE
To
remove
the
needle
(1)
Turn
the
pulley
clockwise
by
hand
until
the
needle
is
raised
to
the
highest
position.
(2)
Loosen
the
needle
set
screw
with
the
screwdriver
or
hex
agonal
wrench
(in
case
your
machine
is
M535/M535C/
M535D)
and
remove
the
nee
dle.
NOTE:
When
removing
the
needle,
hold
the
needle
with
the
tweez
ers
to
avoid
dropping
it.
To
fit
the
needle
(1)
Turn
the
pulley
until
the
nee
dle
bar
is
raised
to
the
highest
position.
(2)
Hold
the
needle
with
its
long
grooved
side
to
the
front
and
insert
it
as
far
as
the
needle
stops.
(3)
Tighten
the
needle
set
screw
securely,
taking
care
that
the
needle
is
set
in
the
correct
position.
It
is
recommendable
to
use
the
golden
needle
(Dl3
x
1
KN#11)
in
the
accessory
when
sewing
knitted
garments.
Needle
bar
j
Model
435/435C1435D
Long
grooved
toward
you
Model
535/535C/535D
—2--
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Huskylock 535C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Huskylock 535C in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info