510454
42
Zoom out
Zoom in
Previous page
1/44
Next page
40
Upper Thread Breaks?
Does the thread feed smoothly and not catching?
Use quality thread. For special threads such as metallic, etc, please consult your
Authorized HUSQVARNA VIKING® Dealer for special needle recommendations.
Rethread top and bobbin threads - check for correct threading.
Try different spool pin positions (horizontal or vertical).
If stitch plate hole is damaged, replace stitch plate.
Is the correct size of spool cap used in front of the thread?
Fabric Does Not Move?
Feed teeth are set in down position; Raise feed teeth.
Increase stitch length.
Check that spool winding is not active.
Bobbin Thread Breaks?
Wind a new bobbin.
Replace the bobbin in the machine, check correct threading.
If stitch plate hole is damaged - replace stitch plate.
Clean bobbin area.
Bobbin Winds Irregularly?
Check threading for bobbin winding.
Wrong Stitch, Irregular or Narrow Stitches?
Turn machine off and on to reset.
Change needle, rethread top and bobbin threads.
• Use stabilizer.
Machine Sews Slowly?
Check setting of Speed Slider.
Remove stitch plate and brush lint from bobbin and teeth area.
Have the sewing machine serviced at your dealer.
Machine Will Not Sew?
Put bobbin winder spindle back into sewing position.
Check plugs are all the way into machine.
Check wall plug and power to wall plug.
Main Motor Blocked
Clear out threads in bobbin case area (see page 38).
Remove stitch plate and clear out threads.
Re-thread machine - top and bobbin.
Have your sewing machine serviced regularly by an
Authorized HUSQVARNA VIKING
®
Dealer!
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna H-CLASS 100Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna H-CLASS 100Q in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna H-CLASS 100Q

Husqvarna H-CLASS 100Q User Manual - German - 44 pages

Husqvarna H-CLASS 100Q User Manual - Dutch - 44 pages

Husqvarna H-CLASS 100Q User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info