477589
59
Zoom out
Zoom in
Previous page
1/96
Next page
59
6
ÖLWECHSEL DURCHFÜHREN
Entfernen der linken unteren Abdeckung des Armaturen-
bretts
Den Deckel anheben.
Die Befestigungselemente (1) von der linken unteren
Abdeckung des Armaturenbretts entfernen.
VORSICHT: Die untere Abdeckung des Armaturenbretts (2)
vorsichtig abnehmen, die Laschen der Abdeckung (3) sind
zerbrechlich.
Die Abdeckung (2) nach oben ziehen, bis die Kegelschlitze
im unteren Armaturenbrett die Laschen der Abdeckung (3)
freigeben, und entfernen.
Ventil für den Ölablauf
Das Abflussrohr am Ventil montieren.
Das Abflussventil mit einem 10mm Schraubenschlüssel
durch Drehen gegen den Uhrzeigersinn öffnen.
Wenn das Öl vollkommen abgeflossen ist, das Abflussven-
til durch Drehen im Uhrzeigersinn schließen. Verwenden
Sie den 10mm Schraubenschlüssel, um ein geringes
Drehmoment zu geben, damit es geschlossen bleibt.
Nicht zu stark anziehen.
Montieren Sie das Abflussrohr wieder ab und verwahren
Sie es an einem sicheren Ort.
POUR CHANGER L’HUILE
Dépose du couvercle du tableau de commande inférieur
Soulevez le capot.
Retirez l’attache (1) du couvercle du tableau de commande
inférieur.
PRÉCAUTION: Retirez avec soin le couvercle du tableau de
commande inférieur (2) en portant attention à ne pas briser
les pattes de fixation (3) du couvercle.
Faites glisser le couvercle du tableau de commande inférieur
(2) afin de dégager les pattes de fixation du couvercle (3)
des fentes coniques (4) au niveau du tableau inférieure,
puis déposez le tout.
Vidange de l'huile du moteur
Montez le tuyau de vidange sur la soupape.
Ouvrez la soupape de vidange en la faisant tourner en
sens anti-horaire à l’aide d’une clé de 10mm.
Lorsque l’huile est entièrement vidangée, fermez la sou-
pape de vidange en la faisant tourner en sens horaire.
Serrez légèrement à l’aide d’une clé de 10mm pour la
fermer solidement. Ne serrez pas trop fort.
Otez le tuyau de vidange et rangez-le en lieu sûr.
02794
1
4
3
2
TO CHANGE OIL
Left lower dash cover removal
• Raise hood.
Remove fastener (1) from left lower dash cover.
CAUTION: Remove lower dash cover (2) carefully to ensure
cover tabs (3) are not broken.
Slide lower dash cover (2) up to release cover tabs (3)
from tapered slots (4) in lower dash and remove.
Oil drain valve
Install the drain tube onto the valve.
Open drain valve by using a 10 mm wrench turning
counterclockwise.
After oil has drained completely, close the drain valve
turning clockwise. Use the 10 mm wrench to apply a small
amount of torque to keep it closed. Do not over tighten.
Remove the drain tube and store in a safe place.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna GTH264T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna GTH264T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info