517446
44
Zoom out
Zoom in
Previous page
1/48
Next page
42
Troubleshooting
Reference
Page 14
Page 20
Page 10
Page 10
Page 21
Page 22
Page 13
Page 40
Change the bobbin.
Page 10
Page 10
Page 21
Page 10
Page 10
Page 14
Change the needle.
Page 20
Page 14
Make stitch shorter.
Page 40
Make stitch longer.
Page 8
Page 20
Page 5
Page 40
Page 12
Page 40
Page 40
Page 29
Use interfacing.
Page 8
Page 32
Page 32
Page 27
Page 27
Cause
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent.
4. The needle is incorrectly inserted.
5. The needle thread and the bobbin thread are not placed under
the presser foot at start of sewing.
6. The threads were not drawn to the rear after sewing.
1. The bobbin thread is not threaded properly in the
bobbin case.
2. Lint has collected in the bobbin case.
3. The bobbin is damaged and does not turn smoothly.
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
4. The needle is incorrectly inserted, bent or blunt.
5. The needle and/or threads are not suitable for the fabric being
sewn.
1. The needle thread is not threaded properly.
2. A poor quality needle is used.
3. The needle thread tension is too tight.
1. The needle thread is not threaded properly.
2. The stitch length is too long for the fabric.
1. The feed teeth are packed with lint.
2. The stitchlength is too short.
3. The feed teeth are not raised after ”drop feed” sewing.
1. The needle thread tension is too loose.
1. The machine is not plugged in.
2. Thread has been caught in the hook.
3. The bobbin winder spindle is still in the winding position.
1. Thread has been caught in the hook assembly area.
2. Lint has built up in the hook assembly area or bobbin case.
1. The stitch density is not suitable for the fabric being sewn.
2. Interfacing is not used when sewing on the stretch
fabrics.
1. Foot pressure is not adjusted properly.
1. Pull down buttonhole lever.
2. Be sure the buttonhole lever is in the back position.
1. Button must be tight in foot.
2. There is space in foot. Check gap.
Condition
The needle
thread breaks.
The bobbin
thread breaks.
The needle
breaks.
Skipped
stitches
Seam
puckering
The cloth is
not fed
smoothly.
Loops on the
seams
The machine
does not
work.
Noisy
operation
Buttonhole
is not sewn
neatly.
Layer slippage
Buttonhole
won't sew
Buttonhole
has gaps
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna EMERALD 118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna EMERALD 118 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna EMERALD 118

Husqvarna EMERALD 118 User Manual - German - 48 pages

Husqvarna EMERALD 118 User Manual - Dutch - 48 pages

Husqvarna EMERALD 118 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info