477579

Husqvarna CTH224T Manual

23
Zoom out
Zoom in
Previous page
1/112
Next page
23
• Replace bagger assembly onto bagger supports (5).
• Readjust if necessary.
• Remove bagger assembly.
• Do NOT remove nuts (3); ONLY loosen nuts (3).
NOTE: The bagger height indication marks (4) can be used to
help determine how much the bagger supports (5) will need to
be moved.
• Raise or lower bagger supports (5) to proper position and
retighten nuts (3).
B
B
• Once bagger assembly is in proper position, tighten adjust-
ment bolts (2) on both sides to 100 In-Lbs/11,2 Nm. Do NOT
overtighten.
• Readjust if necessary.
VERTICAL ADJUSTMENT
If necessary, the vertical position of the bagger assembly can be
adjusted to maintain proper alignment (B) between the fender
and the bagger assembly top.
TO ADJUST BAGGER ASSEMBLY
HORIZONTAL ADJUSTMENT
The tractor comes from the factory with the bagger assembly preset
in a fixed position. If necessary, this position can be adjusted to
maintain a consistent gap (A) between the fender and the bag-
ger assembly top. An ideal gap is approximately 0.25” (6 mm).
• Insert 1/2" (13mm) wrench under bagger assembly top (1).
Do NOT remove; ONLY loosen adjustment bolt (2). Repeat
on opposite side.
• Slide bagger assembly into proper position.
1
1
2
ELECTRIC BAGGER ASSEMBLY ADJUSTMENT
Following bagger adjustment, it may be necessary to adjust the
electric bagger assembly.
• Remove bagger assembly.
• Loosen bolt (1) on each side of the lower clevis bracket (2).
• Move the bracket up or down as needed until alignment
holes (3) are properly lined up and retighten bolts (1).
• Reinstall the bagger assembly.
• Using the switch, fully open the bagger assembly. (See "TO
OPERATE ELECTRIC DUMP SYSTEM" in section 5 of this
manual.)
• Lower the bagger assembly and ensure that the bagger as-
sembly closes securely onto the bagger spring latches. (See
"BAGGER SPRING LATCH ADJUSTMENT" in this section
of the manual.)
NOTE: If the bagger assembly does not close securely with the
bagger spring latch, further adjustment may be needed. Repeat
adjustent procedures until bagger assembly is properly secured
to bagger spring latch.
2
3
1
3
4
4
5
5
2
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH224T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH224T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info