477582
65
Zoom out
Zoom in
Previous page
1/96
Next page
65
6
TO CHANGE OIL
Oil drain valve
Install the drain tube onto the valve.
Open drain valve by using a 10 mm wrench turning
counterclockwise.
After oil has drained completely, close the drain valve
turning clockwise. Use the 10 mm wrench to apply a small
amount of torque to keep it closed. Do not over tighten.
Remove the drain tube and store in a safe place.
ÖLWECHSEL DURCHFÜHREN
Ventil für den Ölablauf
Das Abflussrohr am Ventil montieren.
Das Abflussventil mit einem 10mm Schraubenschlüssel
durch Drehen gegen den Uhrzeigersinn öffnen.
Wenn das Öl vollkommen abgeflossen ist, das Abflussven-
til durch Drehen im Uhrzeigersinn schließen. Verwenden
Sie den 10mm Schraubenschlüssel, um ein geringes
Drehmoment zu geben, damit es geschlossen bleibt.
Nicht zu stark anziehen.
Montieren Sie das Abflussrohr wieder ab und verwahren
Sie es an einem sicheren Ort.
POUR CHANGER L’HUILE
Vidange de l'huile du moteur
Montez le tuyau de vidange sur la soupape.
Ouvrez la soupape de vidange en la faisant tourner en
sens anti-horaire à l’aide d’une clé de 10mm.
Lorsque l’huile est entièrement vidangée, fermez la sou-
pape de vidange en la faisant tourner en sens horaire.
Serrez légèrement à l’aide d’une clé de 10mm pour la
fermer solidement. Ne serrez pas trop fort.
Otez le tuyau de vidange et rangez-le en lieu sûr.
PARA CAMBIAR EL ACEITE
Válvula de purga del aceite
Instalar el tubo de drenaje en la válvula.
Abrir la válvula de drenaje utilizando una llave inglesa
de 10mm girando en el sentido inverso al de las agujas
del reloj.
Después de drenar complemente el aceite, cerrar la
válvula de drenaje girando en el sentido de las agujas
del reloj. Usar la llave inglesa de 10mm para aplicar una
pequeña torsión para mantenerla cerrada. No apretar
más de lo necesario.
Remueva el tubo de drenaje y guardar en un lugar se-
guro.
PER CAMBIARE L’OLIO
Valvola di scarico dell’olio
Montare il tubo di scarico sulla valvola.
Aprire la valvola di scarico con una chiave per dadi da
10mm, ruotando in senso antiorario.
Una volta scaricato completamente l’olio, richiudere la
valvola di scarico ruotando in senso orario. Servirsi di
una chiave per dadi da 10mm per applicare una leggera
coppia di serraggio che manterrà la valvola chiusa. Non
stringere eccessivamente.
Rimuovere il tubo di scarico dalla valvola e riporlo in un
posto sicuro.
OLIE VERVANGEN
Olie aflaatklep
Installeer de afvoerslang op het ventiel.
Open het afvoerventiel door het met een 10 mm moer-
sleutel linksom te draaien.
Sluit het afvoerventiel nadat alle olie is afgevoerd door
het rechtsom te draaien. Draai het ventiel met de 10
mm moersleutel een klein beetje aan om het gesloten te
houden. Draai het ventiel niet te strak aan.
Verwijder de afvoerslang en berg hem op.
02794
65


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH222T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH222T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info