477578
86
Zoom out
Zoom in
Previous page
1/112
Next page
86
6
To Remove Mower
Remove center chute as described previously.
Place attachment clutch in “DISENGAGED” position.
Lower attachment lift lever to its lowest position.
Remove cable (H) by depressing tabs (I) and removing
cable end from bracket (J).
Remove mandrel cover (Q)
Remove mower belt from clutch pulley (M).
Dismantle the retainer spring (E) and remove the lever.
Dismantle the retainer spring (A) and remove the lever.
Dismantle the retainer spring (D) and remove the lever.
CAUTION: Attachment lift lever is spring loaded. Have
a tight grip on rod and release slowly.
Slide mower out from under right side of tractor.
Entfernen Des Mähers
Mittlere Schütte wie oben beschrieben abbauen.
Die Gerätekupplung auf “DISENGAGED” (LÖSEN) stel-
len.
Drücken Sie den Hebel der Gerätehubvorrichtung ganz
nach unten.
Kabel (H) abnehmen, Dazu Laschen (I) herunterdrücken
und Kabelenden aus der Halterung (J) ziehen.
Entfernen Sie die Abdeckung über der Dorneinheit (Q).
Den Mäherriemen von der Antriebsrolle (M) abnehmen.
Federklammer (E) ausbauen und Stange abnehmen.
Federklammer (A) ausbauen und Stange abnehmen.
Federklammer (D) ausbauen und Stange abnehmen.
VORSICHT: Die Hebel der Gerätehubvorrichtung ist
federgespannt. Die Stange gut festhalten und langsam
loslassen.
Den Mäher von rechts unter dem Traktor hervorziehen.
Pour Démonter La Faucheuse
Déposez la goulotte de centrage comme décrit précédem-
ment.
Placez l’embrayage de l’accessoire en position “DÉGAGÉ”.
Faites descendre le levier de levage de l’accessoire dans
sa position la plus basse.
Retirez le cache de l’arbre (Q).
Démontez le câble (H) en enfonçant les ergots (I) et en
enlevant l'extrémité du câble du support (J).
Otez la courroie de la faucheuse de la poulie de
l’embrayage (M).
Déposer le ressort en forme d'épingle à cheveauz (E) et
enlever le levier.
Déposer le ressort en forme d'épingle à cheveauz (A) et
enlever le levier.
Déposer le ressort en forme d'épingle à cheveauz (D) et
enlever le levier.
PRUDENCE: Le levier de levage est à ressort. Saisissez-
le fermement et libérez-le lentement.
Faites sortir la faucheuse en la faisant glisser par l’avant
du tracteur.
Para Quitar El Cortacésped
Retirar el conducto central tal y como se ha descrito
anteriormente.
Colocar el embrague en la posición “DESCONECTADA”.
Bajar la palanca de elevación hasta su posición más baja.
Retire la cubierta del mandril (Q).
Extraiga el cable (H) tras presionar las lengüetas (I) y
retirar el extremo del cable de la abrazadera (J).
Quitar la correa del cortacésped de la polea de embrague
(M).
Desmontar el resort (E) y quitar la palanca.
Desmontar el resort (A) y quitar la palanca.
Desmontar el resort (D) y quitar la palanca.
ATENCIÓN: La palanca de elevación tiene un muelle
cargado. Asirla de modo firme y soltarla despacio.
Deslizar el cortacésped fuera desde el lado derecho del
tractor.
E
A
M
D
Q
J
I
H
86


Need help? Post your question in this forum.

Forumrules
1

Forum

husqvarna-cth184t

Reset search

  • Gibt's für den cth184t eine Abbildung von den Bedienelementen und deren Bedeutung Submitted on 26-2-2023 at 10:59

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CTH184T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CTH184T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info