477560
83
Zoom out
Zoom in
Previous page
1/96
Next page
83
6
2
1
3
REGOLAZIONE DELLA LEVA DEL
MECCANISMO DEL CAMBIO DI VELOCITÀ CON
DIFFERENZIALE
Il meccanismo del cambio con differenziale deve essere in
posizione di folle quando la relativa leva è in posizione di folle
(blocco). Tale condizione viene impostata al momento della
fabbricazione. Qualora fossero necessari ulteriori regolazioni,
procedere come segue:
Verificare che il meccanismo del cambio con differenziale
sia in posizione di folle .
NOTA: Quando le ruote posteriori del trattore si muovono
liberamente, il meccanismo del cambio è posizione folle.
Allentare il bullone di regolazione davanti alla ruota
posteriore destra.
Collocare la leva del meccanismo del cambio in posizione
di folle .
Stringere a fondo il bullone di regolazione.
NOTA: Spostare il piano di supporto della falciatrice nella
posizione più bassa per aumentare il gioco e facilitare l’accesso
al bullone di regolazione.
AFSTELLING VAN DE SCHAKELHEFBOOM
VOOR GECOMBINEERDE VERSNELLINGSBAK
EN ACHTERBRUG
De gecombineerde versnellingsbak en achterbrug moet
in “vrijloop” staan wanneer de schakelhefboom zich in de
vrijloopstand bevindt (sluitboomgrendel). Dit is reeds in de
fabriek afgesteld. Mocht afstelling toch noodzakelijk zijn, ga
dan als volgt te werk:
Controleer of de gecombineerde versnellingsbak en
achterbrug in “vrijloop” staat.
N.B.: Wanneer de achterwielen van de tractor vrij bewegen,
staat de versnellingsbak in vrijloop.
Zet de stelbout voor het rechter achterwiel los.
Plaats de versnellingshendel in de vrijloopstand .
Zet de stelbout stevig vast.
N.B.: Als extra ruimte nodig is om bij de stelbout te komen,
het maaiwerk in de laagste stand zetten.
1. Palanca de Velocidades del Cambio Mecánico
2. Neutro Cierre Metálico
3. Perno de Regulación
1. Leva del Cambio
2. Blocco In Posizione Folle
3. Bullone Di Regolazione
1. Versnellingshendel
2. Vrijloop-Sluitboomgrendel
3. Stelbout
REGULACIÓN DE LA PALANCA DE
VELOCIDADES DEL CAMBIO MECÁNICO CON
DIFERENCIAL Y TRACCIÓN AN TE RI OR
El cambio mecánico con diferencial y tracción anterior tiene
que estar en posición neutro cuando la relativa palanca está
en posición (cierre metálico).
La regulación ya está predefinida por la Casa constructora,
pero si es necesario efectuar más regulaciones, proceder de
la siguiente manera:
Asegurarse que el cambio mecánico con diferencial y
tracción anterior esté en posición neutro .
NOTA: Cuando las ruedas posteriores del trac tor se mueven
libremente, el cambio mecánico está en neutro.
Soltar el perno de regulación en la parte anterior de la
rueda posterior derecha.
Colocar la palanca de velocidades en posición neutro .
Apretar a fondo el perno de regulación.
NOTA: Desplazar el plano de trabajo de la segadora hasta la
posición más baja para aumentar el juego al fin de acceder
al perno de regulación.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna CT154 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna CT154 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 10,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info