734012
5
Zoom out
Zoom in
Previous page
1/128
Next page
8. Remove the battery from the adapter.
To start the battery
Push the power switch of the battery to ON. Refer to
Product overview on page 3
. Wait until the green
LED comes on.
Note: The battery stops automatically when the
battery is not used.
Battery LED indicator
The display shows the state of charge and if there are
problems with the battery.
LED indicator Battery status
All LED lights are on The battery is 80% - 100%
charged.
4 LED lights are on The battery is 60% - 80%
charged.
3 LED lights are on The battery is 40% - 60%
charged.
2 LED lights are on The battery is 20% - 40%
charged.
1 LED light is on The battery is 0% - 20% charg-
ed.
To adjust the shoulder strap
1. Push the button (C) and turn the shoulder strap (A)
to release the shoulder strap. (Fig. 3)
2. Attach the shoulder strap in 1 of 3 positions (B).
3. Turn the shoulder strap to lock it.
To attach the battery to the harness
WARNING: Only use Husqvarna original
batteries.
1. Make sure that the battery is fully charged.
2. Pull out the lock handles. Refer to
Product overview
on page 3
.
3. Attach the battery on the hooks of the harness.
4. Push the lock handles to lock the battery.
To connect the battery to the
Husqvarna handheld product
Note: If you use the accessory (A) for grass trimmers,
attach the accessory to the harness before you connect
the battery.(Fig. 4)
1. Connect the battery to the Husqvarna handheld
product. (Fig. 5)
2. Attach the cable to the harness.
To install the branch protection
The branch protection prevents accidents that can occur
if branches get caught in the handle of the battery.
Put the branch protection (A) in the handle. (Fig. 6)
Troubleshooting
Troubleshooting
Symptoms Cause Solution
The battery error LED flash-
es.
Temperature deviation, the battery is too
cold or too hot to use.
Let the battery cool down or move it in-
doors to warm it up. When the battery
has the correct temperature, it can be
used again. Use the battery in ambient
temperatures between -10°C (14°F) and
40°C (104°F).
The battery is empty. Charge the battery.
The battery error LED
comes on.
The battery cell difference is too much
(1V).
Speak to your dealer.
The battery does not start. The battery fuse is blown. Replace the fuse. Refer to
To replace the
fuse on page 6
.
1433 - 002 - 25.06.2020 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna BLi950X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna BLi950X in the language / languages: All languages as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info