509639
26
Zoom out
Zoom in
Previous page
1/26
Next page
A/V- und Dateneingang/-ausgang
TV SCART
VCR SCART
VIDEO
AUDIO R/L
S/PDIF
RS-232C
Videoausgang (CVBS, S-Video, RGB)
Audioausgang
(Auflösung: 20 Bit DAC, Max. 2V effektiv) Videoausgang
(CVBS) Videoeingang (CVBS, S-Video, RGB)
Audioausgang (Auflösung : 20 bit DAC, Max. 2V effektiv (fix))
RCA/Cinch, Videoausgang (CVBS)
RCA/Cinch Lautstärkeregelung und Stummschaltung
(Auflösung: 20 bit DAC, Max. 2V effektiv)
Digitaler Audioausgang, optisch (Auflösung: 20 Bit)
Übertragungsrate 115, 200 bit/s, 9-Pin D-Sub
Physikalische Daten
Hinweis : Änderungen im Sinne des technischen Fortschritts vorbehalten.
Abmessungen (B
x
H
x
T)
Gewicht (Netto)
Betriebstemperatur
Lagertemperatur
Luftfeuchtigkeit (Lagerung)
370 x 60 x 280mm (ohne Füße)
Höhe der Füße beträgt 8mm
ca. 2,8kg
0°C bis + 45°C
-10°C bis + 70°C
5 %–95 % rel. Luftfeuchtigkeit (nicht kondensierend)
RF-Modulator
RF-Anschluss
Frequenz
Ausgangskanal
TV-Standard
Voreingestellter Kanal
75 IEC 169-2, Stecker / Buchse
470-860MHz
K21-69, K28-69 oder K13-62 für den Remodulator
PAL I/G/B/D/K über Menüeinstellung wählbar
K36 (oder TBD). Software kann über das Menü ausgetauscht werden.
Stromversorgung
Eingangsspannung
Typ
Leistungsaufnahme
Leistungsaufnahme im
Stand-by-Modus
Sicherung
190–250V (Wechselspannung), 50/60Hz
Schaltnetzteil
Max. 35W
11W
Separate interne Sicherung
Eingang muss gegen Blitzeinschlag abgesichert sein.
Tuner und Kanal
MPEG Transport Stream A/V Decoding
Speicher
Sie können einen speziellen DiSEqC-kompatiblen Antennenschalter verwenden. Beim Umschalten z. B.
von ASTRA1 zu EUTELSAT wird ein DiSEqC-Befehl zusammen mit dem 22-kHz-Signal durch das
Antennenkabel geleitet. Der Antennenschalter wechselt dann von ASTRA1 zu EUTELSAT.
Das DiSEqC-Konzept ist ein geschütztes Markenzeichen von EUTELSAT.
Die Bildqualität wird durch die Datenrate des digitalen TV-Signals bestimmt.
Eine Datenrate von etwa 5–6 Mbit/s entspricht der Qualität eines analogen Signals.
Eingangsbuchse
Frequenzbereich
Eingangsimpedanz
Signalstärke
ZF
ZF-Bandbreite
LNB-Leistung und -
Polarisation
22-kHz-Signal
0/12V Gleichstromausgang
DiSEqC-Steuerung
Demodulation
Input System Rate
FEC-Decoder
Transport Stream
Profilebene
Datenrate (Eingang)
Bildformat
Videoauflösung
Audiodecodierung
Audiomodus
Sampling
Hauptprozessor
Flash-Speicher
Grafik-(MPEG) und
System-DRAM
TMIPS R3930 (81MHz)
2MB
4MB
3MB (CAS-Implementierung)
4MB (CAS-Implementierung)
MPEG-2 ISO/IEC 13818
Spezifikation des Transport Stream
MPEG-2 MP@ML
max. 15 Mbit/s
4:3, 16:9
720 x 576
MPEG/MusiCam Layer I & II
Signalkanal / Zweikanal / Joint Stereo / Stereo
32, 44,1 und 48KHz
F-Buchse, IEC 169-24, weiblich
950–2150MHz
75 asymmetrisch
–25 bis -65dBm
480MHz
36MHz
Vertikal: +13,5V
Horizontal: +18V
Strom: 500mA max. Überlastungsschutz
Frequenz: 22 ± 4KHz Amplitude: 0.6 ± 0.2V
Maximalstrom 50mA
Kompatibel mit Versionen 1.0 / 1.2
QPSK
2–31Ms/s
Faltungs-Code-Rate 1/2, 2/3, 3/4, 5/6 und 7/8 mit Einflusstiefe
K=7
Technische Daten
D49 D50
OAK Multi (HOMM10E)_GER_6.28 6/28/02 6:44 PM Page 50
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax VA-5200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax VA-5200 in the language / languages: German as an attachment in your email.

The manual is 2,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info