60506
39
Zoom out
Zoom in
Previous page
1/42
Next page
38
Ontvanger
Fout meldingen in het display
Tijd Display
Probleem Oplossing
Geeft geen aanwijzing op het
display van de ontvanger, heeft
geen spanning.
Controleer het 220V snoer en controleer of dit goed in het stopcontact zit.
Controleer of de On/Off schakelaar op de achterzijde van de ontvanger op ON
staat.
Controleer of de ontvanger in de slaapstand zit.
Geen beeld. Controleer of de ontvanger aan staat (zie boven).
Controleer de video uitgangen (SCART& RCA plug) en controleer de kabels
tussen de ontvanger en TV/videorecorder.
If you are using the RF Output, check that the RF Lead is connected firmly to the
STB and TV/VCR.
Check that you have selected the correct channel or Video Output on your TV.
If you are using the RF Output, check that you have correctly tuned the UHF
channel of the STB or TV.
Check the brightness level of the TV.
Slecht beeld Zie "Geen beeld"
Controleer het signaal niveau.Indien dit te laag is richt de schotel uit.
Geen geluid Zie "Geen beeld"
Controleer het volume niveau van de TV en de ontvanger.
Controleer of de TV en/of de ontvanger in de "Mute" of stiltemodus staat.
Afstandsbediening werkt niet.
Richt uw afstandsbediening rechtstreeks op uw ontvanger.
Controleer en vervang zo nodig de batterijen.
No or Bad Signal
Controleer de LNB en vervang deze zonodig.
Controleer de kabel naar de schotel/LNB.
Controleer de afstelling van uw schotel en richt deze uit indien nodig.
Indien u een Disceq schakelaar gebruikt controleer of de kabel naar de
schotel/LNB is aangesloten op de goede in/uitgang van de schakelaar.
Controleer "Signal Strength" en "Signal Quality" in het Signal Status menu.
Service is not running or scram-
bled / No access to the service
slot.
Controleer of de Common Interface module en smart card correct
zijn ingebracht.
Controleer of de Common Interface module en smart card geschikt zijn
voor de gekozen zenders
Please check the card / No right
for this service / No smart card
in slot and please insert your
card (when using the CAM)
Controleer of de smart card correct zijn ingebracht.
Controleer of de smart card geschikt is voor de gekozen zenders.
Controleer de geldigheid van de smart card.
Het display geeft geen tijd weer.
Controleer of de ontvanger aanstaat.
Zet de ontvanger aan en stem kies een zender welk een tijd signaal uitzend.
(Niet alle zenders ondersteunen dit )
Het display geeft alleen de tijd weer in Standby mode/slaapstand.
De tijd in het display wordt niet
correct weergegeven.
Pas de tijdsinstelling aan in het Settings menu.
Zenders zoeken
"No Signal" bij Manual Searc
Controleer "Signal Strength" en "Signal Quality" in het Signal Status menu.
Controleer de LNB en vervang deze indien nodig.
Controleer de kabel van de LNB.
Controleer de afstelling van de schotel en corrigeer deze indien nodig.
DiSEqC 1.0
Controleer of de LNB op de juiste wijze is aangesloten op de DiSEqC schakelaar.
Controleer de instellingen in het Antenna Setting menu.
DiSEqC 1.2
Controleer of U DiSEqC 1.2 heeft gekozen in het Antenna Setting menu.
Contorleer of de schotel naar de juiste satellite is uitgericht.
:Incorrect data block(CRC-16 Zet de ontvanger uit en weer aan.
:Invalid system ID
Controleer of de systeem ID overeenkomt met de Softwareversie en ontvanger.
:UARTRX/TX time out Zet de ontvanger uit en weer aan.
Fout meldingen op het scherm.
Storings
Hulp
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax IRCI-5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax IRCI-5400 in the language / languages: Dutch as an attachment in your email.

The manual is 3,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info