622635

HQ Power VDSSM5 Manual

5
Zoom out
Zoom in
Previous page
1/28
Next page
VDSSM5
V. 01 – 15/11/2013 5 ©Velleman nv
Taking Down
1. Set all volume controls on the control panel [5,24] to zero.
2. Switch off all audio devices.
3. Switch off [27] the mixing console.
4. Disconnect all audio devices and speakers.
5. Store the microphone and cables in the storage compartments [D].
6. Take the speakers off the stands and fold the stands.
7. Place the folded stands in the mixing console and fix them in place using the straps [E].
8. Place the speakers on top of the mixing console and close the four catches [C].
Caution: Do not force. If the catches do not close properly, then carefully reposition the speakers and try
again.
6. Overview
Refer to the illustrations on page 2 of this manual.
Input channels 1–4
1
MIC and LINE inputs.
MIC: microphone input, XLR jack. Connect a low impedance microphone.
LINE: line input, 1/4" jack.
For channels 1–3: mono input.
For channel 4: use connector LEFT/MONO for mono input, or use both LEFT and RIGHT connectors for
stereo input.
Note: use either the MIC or LINE input. Do not use both inputs at the same time.
2
REVERB: apply a reverb effect to this input channel.
3
TREBLE: adjust the high tones. ± 15 dB at 12 kHz.
4
BASS: adjust the low tones. ± 15 dB at 80 Hz.
5
GAIN: set the channel volume. It determines the proportion of this channel in the mix.
Input channel 5
6
Input source selector:
LINE: select input from the TAPE INPUT jacks.
MP3: select MP3 input from a USB device or SD card
BLT: select input from a Bluetooth device.
7
TAPE INPUT: connect an input device such as a cassette deck or CD player to the RCA jacks. The input
can be added to the mix.
TAPE OUTPUT: connect an output device such as a cassette deck or home audio system to the RCA
jacks.
MP3 player with LCD and remote control
8
LCD
9
USB port: insert a USB storage medium.
10
FOL–: press to select the previous folder on the USB device or SD card.
11
FOL+: press to select the next folder on the USB device or SD card.
12
MODE: press repeatedly to select the desired play mode: USB/SD or FM radio.
13
REPEAT: to set up repeat mode.
14
PLAY/PAUSE: use the play/pause button to switch between playback mode and pause mode.
15
EQ: press repeatedly to select the desired equalizer mode: CLASSICAL, BASS, LIVE, ROCK, or POP.
16
VOL–: press to select the previous track. Press and hold to decrease the volume.
17
VOL+: Press to select the next track. Press and hold to increase the volume.
18
Mute key: mutes the volume of the SD/USB player.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ Power VDSSM5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ Power VDSSM5 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info