622639
5
Zoom out
Zoom in
Previous page
1/17
Next page
PROMIX30_v2 VELLEMAN
5
5. Connections
Make sure the power switch (p.2 #10) is set to “OFF” before making any connections.
Use only high quality audio cables to minimize sound quality losses.
Connect your amplifier to the MAIN output (p.2 #22) and any recording device to the REC output (p.2 #21)
Connect your microphone to the MIC input (p.2 #14) and your headphones to the PHONES output (p.2 #17).
Connect your record players to the PHONO inputs (p.2 #25 & 27) and set the selection switches (p.2 #23 or 24) to PH.
Connect any line signals to the LINE (LN) inputs (p.2 #26 and 28 are line inputs only ; for inputs #25 and 27 you
need to set the switches 23 and 24 to the LN side).
6. Cleaning and Maintenance
1. All screws should be tightened and free of corrosion.
2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)
should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not
change the location of the connections…
3. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.
4. Disconnect the device from the mains prior to maintenance activities.
5. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
6. There are no user-serviceable parts.
7. Contact your dealer for spare parts if necessary.
7. Technical Specifications
Power supply max. 230VAC/50Hz
Microphone input 1.5mV / 2k / balanced
Phono inputs 3mV / 47k
Line inputs 150mV / 27
Equalizer high +12dB / -12dB
Equalizer bass +12dB / -12dB
Master output 0dB / 1V / 600
Record output 0dB / 1V / 600
Frequency response 20Hz~20kHz +/-2dB
Distortion 0.02%
S/N ratio >80dB
Headphones impedance 160
Dimensions 280 x 200 x 112mm
Total Weight 2.7kg
Fuse F 0.5A, 250VAC (5 x 20mm) (order code FF0.5N)
The information in this manual is subject to change without prior notice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ Power PROMIX30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ Power PROMIX30 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info