622638
4
Zoom out
Zoom in
Previous page
1/23
Next page
PROMIX220U
V. 02 – 09/03/2012 4 ©Velleman nv
Always begin with the master faders, volume controls and the amplifier volume at minimum position.
Gradually turn up the volume after connection is completed.
Use the controls with restraint. Rapid movements may damage the speakers due to amplifier clipping.
Use the original packaging if the device is to be transported.
Keep this manual for future reference.
4. Features
outputs: 2 Master (XLR and RCA), 1 Rec (RCA) and booth monitor output (RCA)
inputs: 1 Phono (RCA), 2 Line (RCA) and 1 MIC (Combi)
trim: gain for each input channel
peak level meter: allows the user to instantly determine the source input condition for each channel
talk over: mutes -14dB all levels apart from the microphone
cross fader curve: choose from two types of cross fader start-up options
headphone monitor balance between cue and master out
gain control with 3-fold sound control (+12/-24dB) per channel
MIC channel 1 with 3-fold sound control (+12/-12dB), gain, cue and talk-over
ultra high-performance headphones output, 1-way equalizer, cue-master-mix.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 power switch: turn the mixer on or off.
2 POWER SUPPLY INPUT: connect to 230VAC/50Hz power source
3 Balanced master outputs: audio output signal connectors (XLR, symmetrical)
4 Master RCA output: RCA connection to an auxiliary amplifier (not included)
5 BOOTH: RCA connection for booth monitor (not included)
6 REC: RCA connection to recording device (not included)
7 CONTROL A/B: CD player inputs
8 USB: USB input
9
Input connectors (CH2-CH1): connect an external device (not incl., e.g. turntable, CD player…) to
these RCA (cinch) connectors.
10 GND (ground) connection: when buzzing occurs, connect to turntables to create earth connection.
11 PHONES OUT: plug a headphone into this jack for audio monitoring
12
6.35mm microphone input (microphone not incl.)
MIC LEVEL: adjust the microphone input level
HI/MID/LOW: microphone equalizer
13
Input channel controls (CH1/CH2)
Input selector switches:
Channel 1: LINE or PHONO. Set to PHONO if a turntable (not incl.) is connected to the input;
otherwise set to LINE.
Channel 2: LINE or USB. Set to USB if an input device is connected via the USB port [8]; otherwise
set to LINE.
TRIM: adjust the input signal level
HI/MID/LOW: channel equalizer
14 LED meter: indicates the master output level
15
TALK OVER: press this button to decrease the sound level for everything other than the main
microphone to 14dB. Press again to restore original status.
16
Headphones controls
PHONES LEVEL: adjust the output level of the headphones
CUE: mixing adjustment knob. Turn to the left to hear channel 1. Turn to the right to hear channel 2. At
the centre position, the levels for both channels are even.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ Power PROMIX220U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ Power PROMIX220U in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info