720350
5
Zoom out
Zoom in
Previous page
1/29
Next page
HQMX10001/HQMX10002
V. 03 22/03/2017 5 ©Velleman nv
7.
PAN
This control adjusts the amount of channel signal sent to the left or right output.
8.
OL LED
The overload (OL) LED will burn when the channel’s input signal is too high. This should be
avoided as distortion will occur. Lower the amount of gain if the OL LED burns regularly.
9.
MUTE SWITCH
The mute switch cuts the signal from the channel. The signal is sent to the alt outputs (16).
10.
LEVEL
This control allows you to adjust the volume of each channel.
5.2 Master Section
11.
TAPE INPUT
These stereo unbalanced RCA inputs allow you to play a tape, CD player or other line-level
source. The input is only enabled when the TAPE switch is engaged.
12.
REC OUTPUT
Stereo outputs for recording onto a tape deck, hard disk recorder or automatic CD burner.
The recording output has the same signal as the main output. The output can also be used as
an extra main output.
13.
TRS CONNECTOR
Balanced output for the mixed stereo channel. Can also be used as an unbalanced output.
Use it to feed a sound processor or the L/R speakers. The signal with balanced use is 6 dB
stronger than the signal with unbalanced use.
14.
LINE IN 3/4 or 7/8
Stereo channel with identical functions as the mono channel. To be used as balanced or
unbalanced input.
15.
MP3 SWITCH
Switches the stereo channel between the line and MP3 input.
16.
ALT L/R OUTPUT
Balanced or unbalanced output. The signal is a mix of all channels where the ALT3-4 switch
has been pressed.
17.
FX SEND/RETURN
These ¼” connectors allow you to send the FX line-level outputs to external effects processors
while disconnecting the internal effects processor.
Send: Connection to an external effects unit.
Return: Connection from an external effects unit.
18.
HEADPHONE OUTPUT
Connection for your stereo headphones with ¼” connector.
19.
AUX SEND
Balanced or unbalanced output for stage monitors, or alternatively, an outboard effects unit.
20.
MP3 SECTION
a. USB port
b. MP3 display
c. MP3 player control
21.
AUX SEND MASTER
Overall level control of AUX SEND output.
22.
FX SEND
Overall volume level control of FX SEND output. Adjust carefully to prevent overloading the
effects processor.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ-Power HQMX10002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ-Power HQMX10002 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info