720358
5
Zoom out
Zoom in
Previous page
1/33
Next page
HQAA10010/HQAA10011
V. 03 21 /02/2020 5 ©Velleman nv
5. Connection
Decide where the appliance is to be physically installed it can be used free-standing or
mounted in a standard 19” rack requiring two rack spaces. When installed, makes sure
that both the front and the rear panels are unobstructed and that there is good
ventilation around the entire unit.
Before switching on the appliance, make sure the appliance is switched off and the
volume controls are at their minimum position. It is never a good idea to power up any
amplifier that is not connected to loudspeakers.
Use the correct connectors to connect the appliance to the loudspeakers and sound
system.
6. Using the Bridging Output
When the switch is placed in the STEREO position, the appliance functions as a true
stereo amplifier, where both channels (1 and 2) can receive different input signals and
produce independent output signals.
When the switch is placed in the BRIDGE position, channel 1 is routed to both power
amplifiers bridged together, producing a single output signal.
In BRIDGE mode, connect the red (+) terminal of channel 1 to the positive input of your
loudspeaker, and the red (+) terminal of channel 2 to the negative i nput of your
loudspeaker. Do not use the black (-) output terminals of either channel.
When using the amplifier in BRIDGE mode, please make sure that your speaker
impedance is greater than or equal to 8 Ω.
7. Care and Maintenance
Cleaning
Disconnect from the mains before any cleaning operation.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.
Long Periods of Non-Use
Disconnect from the mains during long periods of non-use.
Service
This appliance should be serviced when:
The power cord or the plug has been damaged.
Objects have fallen or liquid has been spilled into the appliance.
The appliance has been exposed to rain or water.
The appliance does not appear to operate normally.
The appliance has been damaged.
Maintenance
Do not attempt any inspection or maintenance by yourself. Refer all servicing to
qualified personnel.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HQ-Power HQAA10011 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HQ-Power HQAA10011 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info