698686
2
Zoom out
Zoom in
Previous page
1/12
Next page
Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide Quick Start Guide
7 8 9 10 11
PLAYING A RECORD
. Put a vinyl record on the turntable.
. Assemble the balance weight and set it to a proper
position.
. To adjust the balance weight rotate the balance
weight at counter-clock wise.
. Lift and move the tone arm to turntable. Place the
tone arm on the edge of the record.
. Turn the RPM Dial knob to select the speed according
to the record you are playing.
. The turntable platter will auto stop when the music
has ended. Lift the tone arm and place it to tone arm
rest manually.
To listen to side B, flip record and repeat the above steps.
*33 RPM speed to play corresponding size 33 vinyl disc
*45 RPM speed to play corresponding size 45 vinyl disc
To power the unit off Rotate the RPM Dial knob to the off
position.
Note:
Remove the needle cover before you balance the tone arm.
Hold tone arm whenever you make any adjustment or action
so as to protect the tone arm.
Do not try to adjust the balance weight while playing a
record as this could break the needle and scratch the record.
Re-secured the tone arm before transportation to protect
the needle.
Remove the balance weight before transportation to
prevent damage or breakage to the unit.
Do not stop or turn the platter manually. Moving or
jarring the turntable without securing the Tone arm
clamp could result in damage to the Tone arm.
ANTI-SKATING
Normally the anti-skating should be set to its minimum
setting. Anti-skate compensates for inward tracking forces
that occur with certain pick-up when the stylus nears the
center of the record. If the turntable is experiencing
excessive skipping while nearing the center spindle, try
increase the anti-skating in the increments indicated
on the dial. Start by adding an increment of 1, test its
performance, then increase it more, and so on.
Note: During adjusting the anti-skating knob, leave the
tone arm and balance weight alone to prevent damaging the
stylus (needle).
VOLUME CONTROL
Increase Volume: Rotate the Volume Knob clockwise.
Decrease Volume: Rotate Volume Knob counter clockwise.
HEADPHONE OPERATION VIA HEADPHONE JACK
Connect a set of headphone (not included) in the headphone jack.
Note: Never put on the headphone till you have plugged in
the headphone plug
USB TO PC RECORDING
Download Full instruction for the Audacity Software at:
http://www.audacityteam.org/download/
• Connect the Turntable and the computer via the provided
USB cable.
• Follow the instruction of the software installation steps
and operation interface.
BLUETOOTH® PAIRING
• Power on the external Bluetooth® device first before
turning on the BT function on the Turntable.
• Press the BT button on the turntable to turn on
Bluetooth® transmitter.
• Press button again to enable the unit to search the
Bluetooth® device till BT indicator light becomes solid.
This will indicated your devices are paired.
45
33
OFF
• Blue LED light flash
• Blue LED light stable
DISCONNECT BLUETOOTH® PAIRING
Long press and hold the BT button till the BT indicator light
turns off. Turntable will then disconnect from external device.
45
33
OFF
• Blue LED light will turn off.
OUT PUT
PRE-AMP
OFF ON
OUT PUT
PRE-AMP
OFF ON
VOLUME +
VOLUME -
45
33
OFF
1.
3.
5.
2.
4.
6.
POWERING ON YOUR STIR IT UP WIRELESS
• Your Stir It Up Wireless uses an AC power supply and is
powered by a standard wall outlet.
• Connect the power adaptor to the wall outlet.
SETUP
Quick Start Guide
6
45
33
OFF
A. RCA Line Out
B. Pre-Amp Switch Button
C. USB to PC Recording
D. Off// Knob
LEGEND
E. Bluetooth® Button
F. - VOL + Knob
G. Headphone Jack
H. Anti-skating Knob
A.
D. E. F.
B.
G.
C.
H.
FUNCTION LAYOUT
45
33
OFF
OUT PUT
PRE-AMP
OFF ON
OUT PUT
PRE-AMP
OFF ON
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for House of Marley EM-JT002 - StirI t Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of House of Marley EM-JT002 - StirI t Up in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 7,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info