698687

House of Marley EM-JT000 - Stir It Up Manual

3
Zoom out
Zoom in
Previous page
1/173
Next page
POWERING YOUR STIR IT UP TURNTABLE
Your Stir It Up turntable uses an AC power supply and is powered by a standard
wall outlet.
1. Insert the AC power supply into Stir It Up.
2. Insert the wall plug into an appropriate wall outlet.
EASY TO USE
1. Connect the AC power supply to the household outlet.
2. Rotate the OFF / 33/45 knob to turn on the unit and Select the speed according
to the record you are playing.
3. Put a record on the turntable. Remember to use the 45 RPM adaptor located on
the top right corner when playing a 45 RPM record.
4. Lift and move the tone arm to turntable. Place the tone arm on the edge of the
record and the record starts playing.
5. Assemble the balance weight and set it to a proper position.
NOTE: The balance weight is to adjust the pressure of the needle. If the pressure is
too much, the sound will become distorted; if the pressure is too little, track skipping
will easily happen. Please adjust the balance weight by turning the balance weight
clockwise or counter-clockwise.
6. To pause or stop playing, you need to lift and move the tone arm back to the tone
arm rest manually.
7. When the end of the record is reached, the tone arm and rotation stop. Lift the
tone arm and place it to tone arm rest manually.
CONNECTIONS
CAUTION: Switch off the power to all equipment before making connections. Read
the instructions of each component you intend to use with this unit. Be sure to insert
each plug securely. To prevent hum and noise, avoid bundling the signal intercon-
nection cables together with the AC power cord.
LINE OUT OPERATION
1.Switch the PRE-AMP OFF/ON SWITCH to ON position.
2. Plug one end of the RCA cable (included) into the LINE OUT socket at the back
of the unit. Be sure to match the color with the socket.
3. Plug the other end of the cable into the LINE IN socket of your home
amplier device.
4. Switch on the unit and the amplier device you connected.
5. Adjust the volume on the amplier device.
EN
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for House of Marley EM-JT000 - Stir It Up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of House of Marley EM-JT000 - Stir It Up in the language / languages: All languages as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info