720269

Hotspot FT93N Manual

3
Zoom out
Zoom in
Previous page
1/36
Next page
HOTSPOT
V. 04 – 09/07/2018 3 ©Velleman nv
About the Rooms
• The rooms where this gas heater will be used in must be equipped with a ventilation opening of at least
50 cm². In addition, the rooms must be at least 8 m³ while the furniture must not take more than 2 m³ of
space.
• The rooms must have an opening window or door with a minimum width of 2 m.
• We recommend not using this gas heater in rooms where aerosols are frequently being used.
Connecting the Gas Heater
• This gas heater may be connected to the gas cylinder by the user without intervention of a qualified
technician. It is therefore necessary to prepare following elements.
Necessary Elements
• To switch on the gas heater, you will need:
o 1 cylinder of commercial butane of 13 kg, bottled only by an official distributor, and suited for use with
this model.
o 1 certified pressure regulator.
o 1 standard gas hose with a length of 0.5 m.
o 2 screw-threaded hose clamp for flexible gas hoses.
• Please refer to the gas heater's specification tag and contact your gas distributor for more info.
• The connection of this gas heater must be done with a flexible hose and a pressure regulator. Contact your
gas distributor.
5. Connecting the Hose
5.1 Flexible Hose with Screw Fitting (Recommended)
For optimum security and in order to avoid gas leaks, please use a hose with screw connection (not included).
1. Screw the brass fitting with G1/2 thread to the device and tighten with a spanner n° 24. Make sure to hold
the hose with your free hand.
2. Screw the fitting with the 20x150 thread to the regulator and tighten with a spanner n° 23. Make sure to
hold the hose with your free hand.
5.2 Flexible Hose with Nozzle
The heater comes with a nozzle and joint to be used with a simple flexible gas hose.
1. Slide the hose over the nozzle.
2. It is mandatory to secure both connections with a hose clamp (not included). Please contact a technician in
case of doubt.
6. Starting the Gas Heater
After carefully unpacking the gas heater:
• Remove the door at the back of the gas heater.
• Connect the flexible hose to the gas input of the gas heater and to the pressure regulator. Fix with the hose
clamps and make sure the connections are airtight. Do not crimp the gas hose.
• Install the gas cylinder inside the gas heater and connect to the pressure regulator. Open the pressure
regulator and check for gas leaks by brushing soapy water on all the fittings and connections of the gas
circuit.
• Re-install the door at the back of the gas heater.
For their safety, keep children away from all packaging such as cardboard boxes, foams, plastic bags,
etc.
Only install and replace the gas cylinder in a room void of flammable objects and substances.
This gas heater features a safety mechanism which will switch off the device in case of insufficient ventilation or
if the concentration of carbon dioxide (CO
2
) exceeds the legally-stipulated maximum values.
It is normal if this safety mechanism is triggered in small and closed rooms.
If the pilot light dies out, sufficiently ventilate the room and wait a few minutes prior to switching on the gas
heater.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotspot FT93N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotspot FT93N in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info