670863
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
DELAY
It is possible to delay the start time of the program by
2, 4 or 8 hours:
1. After selecting the desired program and any other
options, press the DELAY button. The indicator light will
go on.
2. Select the desired delay time by pressing the DELAY
button repeatedly. The 2 hours, 4 hours and 8 hours
indicator lights will go on in succession. If the DELAY
button is pressed again, the option is deselected and the
indicator light goes o.
3. After the selection process, the countdown will begin
if the START/PAUSE button is pressed. The selected
delayperiod indicator light ashes and the START/PAUSE
button stops ashing (xed light).
4. Once this time has elapsed, the DELAY indicator light
goes o and the program begins.
The Delay function cannot be set once a wash cycle
has been started.
HALF LOAD
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity and
detergent. Select the program and press the HALF LOAD
button: the indicator light will light up. Press the HALF
LOAD button to deselect this option.
Remember to halve the amount of detergent.
TABLET
This setting allows you to optimize the performance of
the program according to the type of detergent used.
Press the TABLET button (the indicator light will light
up) if you use combined detergents in tablet form
(rinse aid, salt and detergent in 1 dose).
If you use powder or liquid detergent, this option
should be o.
DRAIN OUT
To stop and cancel the active cycle, the Drain Out
function can be used.
A long press of START/PAUSE button, will activate the
DRAIN OUT function. The active program will be
stopped and the water in the dishwasher will be drained
out.
OPTIONS AND FUNCTIONS
OPTIONScanbeselecteddirectlybypressingthecorrespondingbutton(see CONTROL PANEL).
If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED ashes rapidly 3 times
and beeps will sound. The option will not be enabled.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint HEFC 2B19 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint HEFC 2B19 C in the language / languages: English as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info