34617
24
Zoom out
Zoom in
Previous page
1/28
Next page
...With the dishes,cutlery,etc.
Remnants of food are stuck to the
dishes,cutlery,etc.
- Dishwasher was not loaded
properly. Jets of water could not
reach all parts of the dishes etc.
- Too many items in the rack.
- Items in the rack were touching
each other.
- Not enough detergent was added
to the dispenser.
- Selected wash programme was
not intensive enough.
- Rotation of spray arm was
obstructed by dish,etc.
- Nozzles in spray arm are blocked
by remnants of food.
- Filters are blocked.
- Filters have been incorrectly fitted.
- Waste-water pump is jammed.
Plastic items are discoloured
- Not enough detergent was added
to dispenser.
- Detergent has insufficient bleaching
properties.
Use a detergent containing a
chemical bleaching agent.
White stains are left on crockery,
glasses have a milky appearance.
- Not enough detergent was added
to input compartment.
- Amount of rinse-aid was set too
low.
- Although water is quite hard,no
salt has been put in appliance.
- Water softener was set too low.
- Lid on salt container is not
screwed tight.
- If you used a phosphate-free
detergent,try a detergent
containing phosphates and
compare results.
Dishes,cutlery etc.have not been
dried.
- Selected programme did not
include drying function.
- Amount of rinse-aid was set too
low.
- Items were removed from
dishwasher too soon.
Glasses have a dull appearance.
- Amount of rinse-aid was set too
low.
Tea stains or traces of lipstick have
not been completely removed.
- Detergent does not have enough
bleaching effect.
- Washing temperature was set too
low.
Traces of rust on cutlery.
- Cutlery is not sufficiently rust proof.
- Salt content in washing water is
too high.
- Lid on salt container is not
screwed on tight.
- Too much salt spilt whilst filling the
container.
Glasses become clouded and
discoloured;coating cannot be
wiped off.
- Unsuitable detergent was used.
- Glasses are not dishwasher proof.
Smears left behind on glasses and
cutlery; glasses have acquired a
metallic appearance.
- Amount of rinse-aid set too high.
24
FP105-01 DWF35/34/33/30 12/02/2002 10:23 am Page 24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint DWF35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint DWF35 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info