538718
10
Zoom out
Zoom in
Previous page
1/124
Next page
Hinges and roller holders6.1.5
Oil hinges and roller holders.
Locking cylinders6.1.6
ATTENTION
Damage to the locking cylinders due to unsuitable
cleaning products
Locking cylinders may not be cleaned with agents
containing oil or be oiled.
Only use specialised care products.
Do not use oil or graphite.
Seals6.1.7
Check for damage, deformations and completeness.
If necessary, replace.
Malfunctions and 7
Troubleshooting
WARNING
Danger of injury due to uncontrolled door movement
If the door malfunctions, uncontrolled door movements
may trap persons or objects.
In the event of a door failure (sluggish operation or
other malfunctions), a specialist must be
commissioned immediately for the inspection/repair
work.
Once the spring safety device has been activated, the door
leaf weight is no longer balanced. Further operation of the
door is no longer possible.
Spring safety device
Once the spring safety device has been activated, hold 1.
the door leaf using a suitable auxiliary tool, then move
the spring shaft with a tensioning spindle so that the
capture pawl can be released and secured with the
security pin.
Afterwards, let the door leaf down, release the springs 2.
and replace the one that has broken.
7.1 Paint treatment
The door leaf is provided with a polyester-primer coating.
If you want to paint the door a different colour, or if a
renovation coating or additional protective coating is
necessary:
Lightly sand the surface with fine sand paper (at least •
180 grain size).
Clean with water, dry and remove any grease•
Treat further with commercially available synthetic •
resin paints suitable for outdoor applications.
Avoid dark coatings on double-skinned doors and doors
with thermal breaks.
Follow the directions of the paint manufacturer!
Door with timber infill7.1.1
Refer to the section on "advice for treating wooden doors"
on how to apply paint treatment to doors with timber infills.
Dismantling8
Dismantle the door in accordance with these fitting
instructions, in the logically correct reverse order.
10
3 048 943 RE / 10.2012
ENGLISH
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Sectionaal garagedeur serie 40 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Sectionaal garagedeur serie 40 L in the language / languages: All languages as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info