538718
9
Zoom out
Zoom in
Previous page
1/124
Next page
Locking and unlocking4.2
The door is not locked when closed with the grip handle.
This is done by using the key or locking lever on the lock.
From outside:
Turn the key 360°
To unlock: turn the key left
To lock: turn the key right
From inside:
Slide the locking lever on the lock
To unlock: slide it upwards
To lock: slide it downwards
Cleaning and Care5
ATTENTION
Scratches on the panes due to improper cleaning
Rubbing the panes causes scratches.
Dirt and dust particles must first be thoroughly rinsed
off with water. If necessary, only wash with water, a
pH-neutral household detergent and a soft, clean
cloth.
Clear water is sufficient for cleaning and care. Use
warm water together with a neutral, non-abrasive cleaning
agent (household detergent, pH value 7) if more heavily
soiled. To preserve the surface characteristics, regular
cleaning must be carried out at least every 3 months
(outside of door, seals). The slide area behind the side
seals must be kept permanently clean and able to slide.
A variety of environmental influences (e.g. maritime
climate, acids, road salt, air pollutants, paint damage) may
make additional protective coating necessary (see Paint
treatment on page 10).
6 Inspection and Maintenance
Inspections and maintenance6.1
WARNING
Danger of injury due to defective safety components
Important safety components may fail or become
defective if not sufficiently inspected and maintained.
Have a qualified person perform inspection and
maintenance work at regular intervals.
The following inspection and maintenance tasks must be
carried out by a specialist in accordance with these
instructions, before initial operation and at least once a
year (or every 6 months if there are more than 50 door
cycles per day).
Inspect all load-bearing components6.1.1
WARNING
Danger of injury due to high cable tension and high
torques
Cables and springs are under high tension and torques.
Damaged cables or springs may also cause serious
injuries.
Fix the door leaf to prevent uncontrolled movement
before exchanging damaged cables or springs.
Be particularly careful when exchanging damaged
cables or springs.
Check load carriers (cables, springs, tracks, supports)
and safety devices for breakage and damage,
replacing any damaged components as necessary.
Spring safety device
Check the effectiveness of the detent pawl and the
secure seat of the locking gear (see Fig. 14.3 Spring
safety device).
Weight counterbalance6.1.2
WARNING
Danger of injury due to uncontrolled door drops
If the counterbalance has not been properly adjusted,
this may result in an uncontrolled door drop, which could
trap persons or objects.
Retension the torsion springs.
High torque
Springs are under high torque stress and may discharge
high forces if they are not secured during tensioning.
Fix the door leaf to prevent uncontrolled movement
before adjusting the torsion spring shaft.
Check the counterbalance of the door leaf
Manually open the door halfway. The door should be
able to hold this position.
If the door moves substantially downwards:
Retension the torsion springs.
Fixing points6.1.3
Check all the fixing points on the door and the building
structure and make sure that all the fastenings are
securely seated and, if necessary, retighten.
Rollers and tracks6.1.4
When the door is closed, the rollers must be easy to turn.
Adjust rollers if necessary. Observe the operator fitting
notes; they contain details on roller adjustment.
Clean tracks, if necessary,
do not grease!
3 048 943 RE / 10.2012
9
ENGLISH
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Sectionaal garagedeur serie 40 L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Sectionaal garagedeur serie 40 L in the language / languages: All languages as an attachment in your email.

The manual is 6,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info