Le constructeur décline toute responsabilité concernant d’éventuelles inexacitudes imputables à des erreurs d’impression ou de transcription contenue dans
cette notice. Le constructeur se réserve le droit de modifier les produits en cas de nécessité, même dans l’intérêt de l’utilisation, sans causer de préjudices
aux caractéristiques de fonctionnement de sécurité des appareils.
The manufacturer will not be responsible for any inaccuracy resulting from printing or transcript errors contained in this brochure. We reserve the right to carry
out modifications to products as required, including the interests of consumption, without prejudice to the characteristics relating to safety or function.
Fixation dans la niche d'encastrement
Vous trouverez dans un sachet à
l'intérieur du four les vis de fixation.
Pour la fixation:
lorsque la porte du four est ouverte,
les trous sont accessibles, ils sont situés
de chaque côté des montants latéraux.
Utiliser les vis fournies pour fixer le four.
FR
4x4.5x25
FOUR / OVEN
GB
Opening 560 x 45
FR
Ouverture 560 x 45
600 min
10 min
Oven fitted under worktop
(dimensions mm)
FR
Four enchâssé sous plan de travail
(dimensions en mm)
GB
TABLE / TOP
GB
Opening 500 x 10
FR
Ouverture 500 x 10
Ouverture 500 x 45
Opening 500 x 45
Four en colonne (dimensions en mm)
GB
FR
Oven in column (dimensions mm)
GB
FR
595
550
22
546
578
552
17
595
560
440
If the furniture is equpped with a
bottom at the back part, provide an
opening for the power supply cable.
560
min
590
560
Opening 500 x 10
FR
GB
Ouverture 500 x 10
Si le meuble est équipé d’un fond à
l’arrière : prévoir une ouverture pour le
passage du câble d'alimentation.
FR
GB
ATTENTION !
UnSerrage excessif des vis de fixation peut entraîner une obstruction de la
ventilation sur les deux côtès du produit. Assurez-vous qu›un espace de
2 mm est toujours prèsent après installation dans le meuble.
ATTENTION !
Applying torque more than needed to fix the screws can close the ventilation
channels on both sides. Please be sure that, these ventilation channels are
2mm open after installation to furniture.
2mm
2mm
Apertura 500 x 10
IT
Apertura 500 x 45
IT
FORNO
IT
Apertura 500 x 10
IT
Apertura 560 x 45
Forno installato sotto il piano di lavoro
(dimensioni mm)
IT
Dentro al forno, c'è una busta con
quattro viti di fissaggio.
Fissaggio:
Quando la porta forno è aperta, i fori di
fissaggio sono accessibili e si trovano sui
montanti laterali.
Utilizzare le viti fornite per fissare il forno.
IT
Fissaggio in nicchia
IT
Forno in colonna (dimensioni in mm)
IT
Se il mobile è equipaggiato con una copertura
posteriore, provvedere ad una apertura per il
passaggio del cavo di alimentazione.
INSTALLAZIONEIT
IT
Il produttore declina ogni responsabilità per inesattezze contenute nel documento stampato o per errori di trascrizione contenuti in questa brochure. Inoltre, si
riserva il diritto di apportare modifiche al prodotto, nell'interesse dei consumatori, senza alcun pregiudizio per la sua sicurezza o funzionalità.
ATTENZIONE!
L'applicazione di una coppia di serraggio superiore a quella necessaria per fissare
le viti in posizione potrebbe ostruire le aperture di ventilazione su entrambi i lati.
Verificare che l'apertura di questi canali di ventilazione sia pari ad almeno
2 mm dopo l'installazione nel mobile.
Il sacchetto all'interno del forno contiene quattro viti di fissaggio.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hoover HOA 54 VX at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hoover HOA 54 VX in the language / languages: English, French, Italian as an attachment in your email.
The manual is 0,93 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
