5
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
Remove the castors from inside the tank, by releasing the securing latches to
access the tank. Turn the tank upside down and attach the castors into the holes.
Connect the hose by inserting the hose connector to the product with the arrow 2.
towards the top, then rotate clockwise until locked.
USING YOUR CLEANER
Ensure the product is correctly assembled together with the securing latches.
2.
3.
To adjust the performance the suction regulator can be adjusted 4. [1]:
Suction regulator open = reduced performance
Suction regulator closed = maximum performance
5. [2].
Dry Vacuuming
NOTE: After wet vacuuming, the appliance must be absolutely dry.
2.
When the product looses suction, stop vacuuming and check the bag and replace 3.
if necessary.
NOTE:
vacuuming and empty the tank. Prolonged use after this time may cause
damage.
Always empty and dry the product after use.2.
dry vacuuming.
GB