511193
4
Zoom out
Zoom in
Previous page
1/70
Next page
USiNG yOUR CLEaNER
CLEaNER MaiNTENaNCE
Turn the cleaner on by sliding the ON/OFF switch forwards to one of the following settings: [5]
•  FLOOR : ideal for hard floor surfaces. Normal power without power brush rotation. [B2]
•  CARPET: ideal for carpets and rugs. Normal power with agitator. [B3]
•  TURBO: press Turbo button for full power on either floor or carpet mode. The Agitator will rotate at maximum speed. [C]
DISPLAY LED*
This cleaner is equipped with a LED display. When the product is on, the display will report the following information:
BATTERY LEVEL INDICATOR*:
•  4 bars = 100% charge
•  3 bars = 75% charge
•  2 bars = 50% charge
•  1 bar = 25% charge
When the batteries are empty the last battery level indicator will ash for 20 seconds before the product switches o automatically.
TURBO: when the Turbo mode is activated on the ergonomic handle, the Turbo icon will light in blue.
CHARGE INDICATOR: When the product is charging, the battery icon will ash every 2 seconds. When fully charged, the icon will
stop ashing and remain lit while the charger is plugged in. The icon will switch o when the cleaner is in use.
Emptying the Dust Container
1. Press the dust container release button and pull the dustbin forwards to remove it from the main body of the cleaner. [6]
2. Hold the unit over a bin and push the bin empty slider to empty the dust container. [7]
3. Return the dust container to the cleaner main body. [8].
Cleaning the Filters
1. Press the dust container release button and pull the dust bin forwards to remove it from the main body of the cleaner. [6]
2. Pull the lter and shroud assembly from the dust bin using the grips on the lter frame. [9]
3. Twist the lter anticlockwise to remove it from the shroud. [9]
4. Wash the lter in lukewarm water and leave to dry for 24 hours. Once thoroughly dry reassemble to the shroud and dustbin.
[10]
5. If required, wash the dustbin in lukewarm water. Ensure it is fully dry before returning to the main body of the cleaner. [13]
6. Return the dust container to the cleaner main body. [8].
Note: Do not use hot water or detergents when cleaning the lters. In the unlikely event of the lters becoming damaged, t a
genuine Hoover replacement. Do not try and use the product without a lter tted.
Important: For optimum performance, always keep your lter clean. We recommend that the lter should be washed once a month.
PREPaRiNG yOUR CLEaNER
4
* Certain Models Only
GB
1. Line up the ergonomic handle to the main body of the cleaner and x in position with the supplied locking screw. [2]
2. Line up the nozzle with the main body and rmly push into the neck until it locks into place. [3]
3. Plug charger into the DC socket. For rst use, charge your cleaner for 24 hours. [4]
4. The charge indicator will ash when charging.
Note: To remove the nozzle press the nozzle release button and pull away from the main body.
Note: Use only the charger supplied with your cleaner to recharge.
Important: When charging the cleaner the On/O switch must be in the OFF position.
It is normal for the charger to become warm to the touch when charging.
If the operating times reduces after repeated use let the cleaner run until it stops then recharge for 24 hours, repeat this monthly
for best results.
Unplug the charger in the event of prolonged absence (holidays, etc.). Recharge product again before us as batteries may self
discharge over increased periods of storage.
AthenManual-UpdateSeptember2012_union.indd 4 13/09/2012 11.12.05
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover ATN 204 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover ATN 204 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info