637664
15
Zoom out
Zoom in
Previous page
1/19
Next page
22
ENGLISH
4.2 Daily cleaning (Fig. 10)
ATTENTION
Daily operations to carry out when work has ended, with
the machine off, the main circuit-breaker disconnected,
the water cocks off and the washing tub empty.
1. Thoroughly clean the inside parts of the machine.
2. Remove the filter (22) from the bottom of the machine
by releasing the overflow (21).
3. Remove the suction protection (23) (only for model C
43-48-53/SP 35-40-45).
4. Wash the filters under running water and fit them
correctly back in their housings.
ATTENTION
The filter (36) extraction and cleaning
can be also done with full tank .
ATTENTION
Frequently check and clean the spraying units, removing
them from their housings and eliminating any dirt and
fouling. The frequency with which this operation must be
carried out depends on the quantity of dirt or on the
unsatisfactory washing results. Never use corrosive
products like sodium hypochlorite (bleach) or hydrochloric
acid, wire wool or steel brushes to clean either the inside
or outside parts of the machine.
5. PREVENTION MAINTENANCE (Fig. 10)
ATTENTION
The preventive maintenance operations must be carried
out with the machine off, the main circuit-breaker
disconnected, the water delivery cocks off and the washing
tub empty.
5.1 Checking and cleaning the spray arms and
nozzles (Fig. 10)
Periodically check to make sure that the lower washing
arm (24) and rinsing arm (25) and their relative nozzles are
not clogged.
Cleaning the lower unit (for models 35-43-48 C-CD
SPB 35 - 35-40 - SP- SPD):
1. Unscrew the ring nut (26) and lift the arm (24).
2. Wash the washing and rinsing rods.
If the nozzles (27) are clogged, unscrew them to
demount and clean, taking care to prevent the shape of
the nozzle from being deformed. After cleaning, fit the
nozzles exactly back in their original positions.
3. Remount all parts by complying with the above
instructions in reverse.
Cleaning the lower unit (for models 53-60 C-CD
45-50 SP-SPD):
1. Unscrew the central pin (28) removing rod (25) and
unscrew the ring nut (29) and rod (24).
2. Wash the washing and rinsing rods.
If there are clogged nozzles (30), demount them (only
the rinsing rods) and clean them with a steel rod, taking
care to prevent the nozzles themselves from being
deformed. Now fit them back in place in exactly their
original positions.
3. Remount all parts, proceeding in reverse.
Cleaning the lower unit (for models 43-48 CR-CRD
36-41 SPR SPRD-C 6-SP 5-C 6 D-SP 5 D):
1. Unscrew the plug (31) and then remove the water
baffle plate (32) and clean it.
2. Clean the washing (33) and rinsing nozzles (34).
3. Fit all parts back in place proceeding in reverse. Take
particular care to fit the water baffle plate back in the
correct direction (32).
5.2 Weekly regenerating operations
(for mod. CD-CRD-SP-SPD-C 6 D-SP 5 D only) (Fig.
10)
1. Switch off the machine and proceed with daily
maintenance as indicated in the relative section.
2. Unscrew the plug (35) from the salt reservoir and pour
in 1 Kg of coarse kitchen salt.
3. Fully retighten the plug (35) to make sure that the
reservoir is hermetically sealed.
6. TEMPORARY INACTIVITY
If the machine is to remain inactive for a certain period of
time, disconnect the electrical power source and turn off
the water delivery cocks. Leave the tub door open.
Drain off the water from the boiler by placing a vessel
under it and unscrewing the relative drain screw.
Wait until the boiler has emptied, then fit the screw back
in place.
7. DEMOLITION
When the machine must be scrapped, first drain the water
from the tub and boiler as indicated in the previous points
and disconnect the machine from the water and electricity
mains. Now dispose of the components as prescribed by
the current laws in force.
The instructions, drawings, tables and everything
else in this manual are of a confidential technical
nature. For this reason, none of the information may
be either completely or partially duplicated or disclosed
to third parties without prior written authorization
from HOONVED s.r.l. which is the sole proprietor and
which reserves the right to make any modifications as
may be considered necessary without advance
warning.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoonved SP 5 D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoonved SP 5 D in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoonved SP 5 D

Hoonved SP 5 D User Manual - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info