613691
34
Zoom out
Zoom in
Previous page
1/34
Next page
34
50047645-008 A
CONFIGURATION & SERVICE DATA
Configuration Data (to be completed by Installer)
The tables below are for the Installer to complete to indicate how your ST9420C and
DT92E have been configured.
Application
Insert application number as per Installation wiring diagrams:
Configurable Features Options Factory
setting
Installer configured
(tick box or note value)
ST9420C Configuration - standard
24hr or am/pm clock
display.
am/pm display
24hr display
Display backlight operation. Off
on if button pressed
on continuously
Automatic time change. disabled,
enabled
1-day or 5/2-day or 7-day
operation.
1-day operation
5/2-day operation
7-day operation
Number of ON/OFFs per
day.
2 on/offs per day,
3 on/offs per day
Default time programme. A = standard
b = at home
C = economy
Hot water set temperature From 40 to 85°C 60°C
Optimum start no optimum start
delayed start
optimum start on
Optimum start limit 1 hour
2 hours
3 hours
Optimum stop disabled
enabled
Frost protection temperature From 5 to 16°C 5°C
Minimum ON/OFF time 1, 2, 3, 4, 5 minutes 1 minute
Cycle rate 3, 6, 9, 12 cycles
per hour
6 cycles
Proportional band width From 1.5 to 3.0°C 1.5°C
Failsafe mode (loss of RF
communications)
off
on 20%
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell Y9420S Sundial RF2 Pack 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell Y9420S Sundial RF2 Pack 3 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info