585448
15
Zoom out
Zoom in
Previous page
1/17
Next page
Appendix
28
homexpert
tm
by Honeywell THR842DUK Wireless Digital Thermostat
29
Re-binding procedure
If you must replace a wireless thermostat or relay box, the system
will not work until both devices can communicate with each other.
This is called binding. Follow the steps below to re-establish wireless
communication.
1 Hold thermostat about 1 or 2 metres from the relay box, then
press and hold the relay button for 15 seconds.
Note: After 5 seconds the red light flashing pattern will change,
but you must hold down the button for at least 15 seconds to
clear previous binding information from memory.
2 Release the relay button, then press and hold it again for 5
seconds, until the red light flashes evenly (“binding” mode).
3 Release the relay button, then press and hold the thermostat
ON/OFF button to turn off the thermostat.
4 Press and hold the thermostat p and q buttons until the screen
changes as shown at left.
Press and hold relay box button
5 Press the p button repeatedly until the display shows “CLr.”
Then press the ON/OFF button to clear previous binding to other
devices.
6 Press the p button again to return to binding mode.
7 Press the ON/OFF button again to re-establish wireless
communication with relay box. If successful, the red light on the
relay box will turn off, and the thermostat will return to normal
operation in Off mode a few seconds later.
CL
C0nt
5.0
°
c
i0se
Press
and hold
Press
and hold
Re-binding procedure (continued from page 28)
25.0
°
c
Red light
should turn off
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell THR842DUK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell THR842DUK in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info