The picture above left shows the diagram that is printed in the installation instructions. It is a diagram drawn to
I.E.E. guidelines. The picture above right is a photograph of the actual thermostat terminals. Wire in the
thermostat according to the number, not the order the terminals are positioned. The "heating load" could be a
pump, boiler or motorised valve. There is NO colour coding in central heating wiring so we cannot recommend
a "colour-to-a-number".
A room thermostat is basically a switch, making and breaking a 230V electrical signal according to room
temperature. It is essential that a neutral connection is made to Terminal 2 to give accurate temperature
control. (The T6360B will not work on 24V)
On the T6360B range of thermostats Terminal 1 is the Live IN (LINE) and Terminal 3 is the Switched Live OUT
(LOAD). In order to respond to temperature change accurately, the room thermostat must have a separate
Neutral connection on Terminal 2. If replacing an existing thermostat that does not have a separate neutral
wire, the T6360B cannot be used. Alternatively, use a volt-free DT200 thermostat or CM900 series
programmable thermostat as the replacement.
Typical wiring configurations
honeywelluk.com
4
3
2
1
HEATING LOAD
L
N
230V~
50..60Hz
CH ON
Programmer
13
N
2
WHITE
T6360BV4073A
CH ON
Programmer
13
N
2
BROWN
T6360BV4043H
S Plan
HTG VALVE
L
L
N
E
SWL
T1
3
2
1
N
T6360B
Y Plan
S Plan
Typical 240V combiboiler
1234
(Remove link)
NOTE: Terminal 4 is the 'make on
temperature rise' contact; this can
be used to power a 'cooling'
ventilation fan. Please note you
can’t wire both heating and cooling
to the same thermostat.
This FAQ sheet is for guidance only and at the time of production represented the latest information available to Honeywell from various sources. Honeywell
reserves the right at any time and without notice to change any product, specification or any other information contained in this publication and cannot
accept any responsibil
ity for loss or damage arising out of any errors that may inadvertently be contained herein.
Technical support: Ring 08457 678999 (local rate charge), +44 (0)1344 656125 (calls from outside the UK) or email technical.support@honeywell.com
Sales enquiries: Ring 01344 656591 or e-mail uk.infocentre@honeywell.com
Sales support literature: Visit the Downloads section of honeywelluk.com, ring 0800 521121 (UK only) or e-mail literature@honeywell.com
EN1H-2485 UK01 R1208
Need help? Post your question in this forum.
1
Forum
honeywell-t6360
Reset search
I have a T6 Honeywell Thermostat. I touched menu instead of mode to change from heat to cool and now I am locked out of the system. How can I get back in? The thermostat is asking for a code and I don’t have a code. Thank you!
Submitted on 5-6-2023 at 06:32
to se the thermostat it would appear you turn the dial to the first click and then return anti clockwise to set the desired temperature. The second click would appear to be the room temperature.is this correct?
Submitted on 1-11-2022 at 19:01
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Honeywell T6360 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Honeywell T6360 in the language / languages: English as an attachment in your email.
The manual is 0,05 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
