527127
5
Zoom out
Zoom in
Previous page
1/8
Next page
STEP 2: HEAT OUTPUT
Your unit has three output levels
HIGH: 1500 Watt Heating
MED: 900 Watt Heating
LOW: 600 Watt Heating
Push the up button (+) to increase output level and push the down
button () to decrease output level. The LED's will illuminate to
reflect which output level you have selected (Fig. 8).
STEP 3: SET THERMOSTAT
• Adjust your thermostat anywhere between 60
°
F (15
°
C) and
80
°
F (27
°
C).
• Push the up button (+) to increase the desired temperature and
push the down button () to decrease the desired temperature
level. The LED's will illuminate to reflect the temperature you have
selected (Fig. 9).
For example: If you set your thermostat at 65
°
F (18
°
C), the 60
°
F
(15
°
C) and 65
°
F (18
°
C) LED’s will be illuminated.
• Once you have set your desired temperature, the unit will operate
under this desired setting until the unit is turned off.
• When the desired temperature has been reached, the unit will
automatically shut off. (The thermostat LED's will remain
illuminated)
• Your unit will turn back on when the current room temperature
decreases below your desired temperature.
STEP 4: CHILD-LOCK FEATURE
• This heater is equipped with a child-lock feature. This feature will
keep the established settings from being adjusted unintentionally.
To activate the child-lock, once the desired settings have been
established, depress the up button (+) and down button () at the
same time and hold for 3 seconds (Fig 10). To deactivate the
child-lock, depress the same up button (+) and down button () at
the same time and hold for 3 seconds.
NOTE: This feature will not keep the heater from being turned on.
It will, however, keep the controls from being adjusted once the
heater has been set.
HZ-3220 OPERATION
(CONTINUED)
Fig. 9
Fig. 8
Fig. 7
Heat Output
Control
Thermostat
Control
Power
Button
Fig. 10
HZ-2200-3200-3220_OM_Rev1.qx 6/8/05 1:19 PM Page 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HZ-3200 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HZ-3200 Series in the language / languages: English as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info