Manual Honeywell HYF023 Series (page 3 of 14) (English, French, Spanish)

723859

Zoom out

Zoom in

1/14

4 5

HYF013 SERIES OPERATION INSTRUCTIONS

• Place the fan on a level and dry surface.

• Plug the power cord into a polarized 120 Volt AC wall outlet.

• To operate, turn knob and select appropriate fan speed:

High ( ) Medium ( ), or Low ( ) (Fig. 13).

• To activate or disengage the fan oscillation, press the oscillation

button. (

) (Fig. 14).

• Operate the automatic shut-off timer feature by turning the timer

knob to the desired setting of 10 to 120 minutes (Fig. 15).

• To turn on the fan after automatic shut-off, turn the knob

counterclockwise

to the ON position

•

To turn the fan Off, turn

knob to the Off position.

( )

HYF023 SERIES OPERATION INSTRUCTIONS

• Place the fan on a level and dry surface.

• Plug the power cord into a polarized 120 Volt AC wall outlet.

• To turn the fan on, press the Power button (

) located on

the left side of the control panel.

• To select fan speed, press Speed Control button (

) until

the desired speed is selected:

High (

), Medium ( ), or Low ( ) (Fig. 16).

• To activate or disengage the fan oscillation, press the

oscillation button (

). Press the Oscillation button again to

turn the Oscillation feature off (Fig. 17).

Fig. 16

Fig. 17

NOTE: Remove all contents from the box being careful not to discard the manual and hardware needed

for assembly. A phillips head screw driver (

) is required for assembly and is not included with the

fan purchase.

A. Pedestal Assembly

• Place the power cord through the center of the front and rear

pedestal assemblies with the screw hole openings facing

towards the fan.

• Align the front and rear pedestal assembly and firmly snap

together (Fig. 7).

B. Securing the Tower Fan to the Pedestal

• Gently turn fan upside down.

• Line up the 3 screw holes on the pedestal with the 3 screw

holes on the bottom of the fan housing. Use the 3 (M5 x 12)

screws included in the box and a phillips head screw driver

(

) to secure the pedestal to the fan housing (Fig. 8).

C. Base Assembly

• With the fan in the upside down position, pass the power cord

through the recessed slot located in the center of the rear base

assembly (Fig. 9).

• Align the rear and front base assembly and firmly snap together

by pushing the 4 round extrusion into the adjacent circles of the

connecting pieces (Fig. 10).

D. Securing the Tower

Fan to the Base

• Align the 3 screw holes in

the bottom of the pedestal

with the 3 screw holes

located on the base. Using

the 3 (M5 x 12) screws and

phillips head screw driver

(

), secure the base into

the bottom portion of the

fan housing (Fig. 11).

• Place the power cord

through the cut out on the

bottom of the base. Gently

pull any slack out of the

power cord and place the

cord securely in the power

cord holding bracket

(Fig. 12).

• Place the fan right side up.

Your fan is now ready for use.

HYF013, HYF023 SERIES ASSEMBLY INSTRUCTIONS

Fig. 10

Fig. 11 Fig. 12

Fig. 9

Fig. 7

Fig. 8

Fig. 14

Fig. 15

Fig. 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HYF023 Series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HYF023 Series Manual

Product: