Manual Honeywell HUL520 Series (page 3 of 15) (English, French, Spanish)

723832

Zoom out

Zoom in

1/15

4 5

Step 2

FILLING/REFILLING

OPERATING

NOTE: Water Tank should be carried using two hands. One hand using carrying handle located

on tank top and other hand supporting the base of the tank.

Kaz will not accept responsibility for property damage caused by water spillage.

1. Remove Tank and turn upside down.

2. Turn Tank Cap in the direction of the open lock symbol to remove cap.

3. Fill Tank with cool water. Do not fill with warm or hot water.

4. Securely replace Tank Cap, aligning arrow to lock symbol. Be sure that the black Cap Seal

is securely in place.

5. Place Tank back on base.

CAUTION: Use care when handling Water Tank to avoid unnecessary impact. Banging or

dropping the Water Tank could result in damage to the tank that will cause leaking.

Step 1

Step 3

1. Power: With the Power Knob in the off position, plug humidifier into a polarized 120V outlet.

CAUTION: To avoid electric shock do not plug humidifier into outlet with wet hands.

2. Output: Turn the Power Knob to highest setting.

3. Humidity Level: When a comfortable humidity level is reached turn Power Knob to a lower

setting. A comfortable humidity level is between 40-60%.

To monitor your humidity level use a humidity monitor such as the Vicks V70 or V70-CAN

model or the Honeywell H10C model.

If you notice condensation on the walls, windows or around unit, your humidity level is too

high. Turn humidifier off.

4. Direct mist output away from walls, furniture and bedding.

CAUTION: Before moving humidifier, turn off, unplug and empty the humidifier.

Step 2 Step 3

Step 4 Step 5

Step 1

Step 4

To properly clean your humidiﬁer we recommend the separate processes of Scale Removal

and Disinfecting shown below. These two processes must be performed separately.

All maintenance should be done in the kitchen or bathroom on a water resistant surface near

a faucet. Do not wash any components of this humidiﬁer in the dishwasher.

Instructions for Scale Removal

1.Turn off and unplug the humidiﬁer.

2. Remove Water Tank from Base. Remove Tank Cap, taking care that black rubber Cap Seal

does not come off. Empty water from Water Tank and Base.

3. If accessory is installed, remove accessory and set aside. Do not clean accessory. This will

damage the accessory.

4. Add 2 cups of undiluted distilled white vinegar to Water Tank. Replace Tank Cap and swish

vinegar solution around in Tank. Place Tank on Base. Vinegar solution will drain into Water

Reservoir and loosen mineral buildup (scale) on Nebulizer and Float as they soak in the

solution. It will also loosen scale on bottom of Water Tank.

5. Soak for 15-20 minutes.

6. After soaking, unlock Tank Cap and pour solution out in sink. Pour solution from

Water Reservoir out in sink. Wipe Nebulizer and Float with soft cloth to remove loosened

mineral deposits.

7. Rinse Water Reservoir and Water Tank until smell of vinegar (for Scale Removal process) or

bleach solution (for Disinfecting process) is gone. Make sure water does not enter the fan

opening (vented opening in back of base) or Power Knob.

CAUTION: Do not submerge Base in water. Doing so will damage the humidiﬁer and void

the warranty.

WEEKLY CLEANING

Step 6 Step 5 Step 7

Step 3

Step 2

Step 1 Step 4

2 cups

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HUL520 Series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Honeywell HUL520 Series Manual

Product: