723852
2
Zoom out
Zoom in
Previous page
1/12
Next page
The Turbo Force
®
High Velocity Air Circulator Fans are aerodynamically designed to
give you the versatility of changing this fan’s angular direction simply by adjusting
the fan to the desired angular output (Fig.1). Upon using this fan, you will feel a
strong and powerful air stream that will quickly move air to provide a cooling effect.
INTRODUCTION
FOR ENERGY SAVINGS ALL YEAR
Energy
Savings
$
Honeywell Air Circulator Fans may help save energy and may lower monthly utility
bills all year round. Our air circulators increase distribution of cooler air from your air
conditioner or warmer air from your heating system, creating a vortex of air flow for
increased comfort. Increased air flow allows the air conditioning and heating systems
to be used at lower settings to help save you money.
In the summer:
Circulate cool air by
using with window
or central air
conditioning.
Circulate cool
air upstairs.
In the winter:
Circulate warm air. Position your air
circulator in an open location for upward
air movement. Run it on a low setting to
move the hotter air from the ceiling and
circulate the warmer air throughout the
room.
Increase Heating Source Efficiency:
Use with other heat sources, such as
wood stoves, baseboard heaters, and
or vents to help circulate the warm air
throughout the room.
FUSED SAFETY PLUG - FOR US MODELS ONLY
This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault occurs. Please
see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.
USER SERVICING INSTRUCTIONS
If your fan loses power and you suspect that the fuse on your fan has blown, grasp plug and
remove from the receptacle or other outlet device. DO NOT unplug by pulling on cord.
Slide fuse cover, located on the top of the plug, towards the prongs of the plug. (Fig. 1)
Carefully remove the blown fuse and snap a new fuse into place. To reduce the risk of fire,
replace fuse only with 2.5 Amp, 125 volt fuse. Fully close the fuse door by sliding back into
place. Discard the blown fuse. The plug should now be ready for normal use. (Fig. 2)
To reduce the risk of fire, DO NOT replace attachment plug. The plug contains a safety
device that should not be removed. Discard product if the attached plug is damaged.
If you need further information on how or when to replace the fuse in the safety plug, please
contact our Consumer Relations department at 18004770457. You may also visit our
website at www.HoneywellPluggedIn.com..
Fig. 1
Fig. 2
Fig. 1
2
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Honeywell HPF860 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Honeywell HPF860 Series in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info